Black Friday Woche läuft bis 30.11.: our pick in each buying guide
Independent buying adviceEvery claim with a sourceNo paid verdictsIn 36 countries1,745 guides and reviews in German How we test
handgetestet

Buying a wall plug set: universal plugs, cavity anchors and heavy-duty anchors for concrete, brick and drywall, with manufacturer load ratings.

handgetestet editorial team · Updated November 17, 2026

Editorial selection based on research, not tested by us. Reasons and limitations are in the text.

Contents12 sections

This guide was first published in German on handgetestet.de.

When buying wall plugs, most people think of the brand first. But what matters is the wall. Whether you are drilling into concrete, brick or drywall determines what you need, and after that, a well-assorted box of universal plugs plus a few cavity anchors is usually enough for the household. As a starting point, we consider the fischer Meister-Box DuoPower/DuoTec a sensible first buy, because it contains exactly this mix, screws included. Heavy-duty anchors do not belong in an all-purpose set. You buy those individually, for the specific job.

How can I tell what kind of wall I am drilling into?

By the drilling dust and the resistance. Concrete is hard and gray and produces fine dust. In vertically perforated brick, the resistance suddenly drops at a certain depth because the bit breaks into a cavity; fischer describes it the same way in its wall plug guide. Drywall gives itself away with white powder and a hollow sound. If doubts remain, a small test hole in an inconspicuous spot helps. Which drill bits are up to the job is covered in our overview of drill bit sets (in German).

Which wall plug holds in which base material?

In concrete and solid brick, universal plugs expand firmly and carry the most. For very hard walls, our rotary hammer guide will help.

Vertically perforated brick and hollow block are a different story. Universal plugs carry noticeably less here, and for heavy loads fischer specifies an anchor sleeve, threaded rod and injection mortar instead of plastic plugs. In drywall, universal plugs do knot behind the board, but there they only hold light items. Shelves and wall cabinets call for toggle anchors such as the DuoTec.

The trickiest is aerated concrete. For small universal and DuoPower plugs, fischer states a recommended load of no more than 3 kg in it.

And the screw? According to fischer, the largest permissible screw diameter for the respective plug gives the highest load capacity. The screws included in a box are matched to this.

How seriously should you take the kilo ratings on the pack?

All load values here are manufacturer specifications. One example shows how far apart they are: for the DuoPower 8 x 40, fischer states a „max. load“ of 110 kg in concrete, but only 25 kg in vertically perforated brick and 15 kg in 12.5 mm drywall. The same plug, a quarter of the load. The same product page states that the details of any available approval apply. fischer also advises calculating the load generously, even if it is spread over several plugs, and distinguishing between tensile, shear and oblique forces.

Safety note: For overhead loads, such as lamps, ceiling hooks or swings, and for heavy loads such as wall cabinets, sinks or railings, only the approval (ETA, European Technical Assessment) and the manufacturer’s installation instructions count, not the figures printed on an assortment box. If the base material, hole depth or edge distance do not match the specifications, the value no longer applies. If in doubt, the manufacturer’s technical advisory service or a specialist contractor can help. If you are mounting a TV, you will find advice on that in our guide to TV wall mounts.

Five sets and plugs according to manufacturer specs

ModelContents according to manufacturerLoad rating according to manufacturerBest forOffer (affiliate link)
fischer Meister-Box DuoPower/DuoTec (87 pieces)DuoPower 6 x 30 and 8 x 40, DuoTec 10, matching screwsDuoPower 8 x 40: max. 110 kg concrete, 62 kg solid brick, 25 kg vertically perforated brick, 15 kg drywall 12.5 mmApartments with mixed wallsAvailable in Germany: Amazon.de
TOX L-Boxx Mini Allround Tri + S (280 pieces)Tri all-purpose plugs with screws (TX drive), divisible boxTri 6/51: 60 kg concrete C20/25, 40 kg solid masonry, 25 kg vertically perforated brick (holding values)Lots of drilling, workshopAvailable in Germany: Amazon.de
Upat Dübelbox UB UVD II (110 pieces)UVD II 6 x 30, 8 x 40, 10 x 50 with collar, no screws0.24 to 1.85 kN tensile, shear and oblique loadRestocking, your own screwsAvailable in Germany: Amazon.de
fischer DuoTec 10 S PHNylon toggle anchor with pan head screw, 10 mm drill hole20 to 51 kg recommended, depending on board and thicknessDrywall, dry constructionAvailable in Germany: Amazon.de
fischer Bolzenanker FAZ II Plus 10/20 gvzSteel anchor M10, 25 piecesonly according to approval ETA-19/0520Heavy loads in concreteAvailable in Germany: Amazon.de
Want a second opinion before buying?Ask via WhatsApp

fischer Meister-Box DuoPower/DuoTec

According to fischer, the box contains DuoPower plugs in 6 x 30 and 8 x 40, six DuoTec 10 for cavity walls and the matching countersunk and pan head screws. fischer lists the DuoPower as a two-component universal plug for concrete, brick, aerated concrete and plasterboard. On fischer’s own site, the piece counts differ slightly between the description and the technical data. So do a quick count after buying. The box covers pictures, mirrors, coat racks and the occasional shelf. Not sinks.

TOX L-Boxx Mini Allround Tri + S

Tox calls the Tri the original all-purpose plug. In solid material it expands, in cavities it knots. 280 pieces with screws come in the divisible box, which can be stacked with other L-Boxx containers. If you already work with system cases, this is where you benefit. Tox does not list the individual sizes online; the holding values in the table come from the page for the Tri 6/51.

Upat Dübelbox UB UVD II

110 universal plugs in three sizes, all with a collar. This collar prevents the plug from slipping backward in perforated brick. This version has no screws; the variant with screws is called UB UVD II S. Upat states the loads in kilonewtons; 1 kN corresponds roughly to 100 kg of weight force. With a well-stocked screw box, this is the leaner choice.

fischer DuoTec 10 S PH

A nylon toggle anchor that turns crosswise behind the board. In its drywall guide, fischer states a recommended load of 20 to 51 kg, depending on the material and board thickness. According to the product data, the board must be between 9.5 and 55 mm thick, with a cavity of at least 40 mm behind it. If you do a lot of fastening in dry construction, buy it in larger quantities in addition to the box.

fischer Bolzenanker FAZ II Plus 10/20 gvz

Not a DIY set. A steel bolt anchor for heavy loads in concrete. fischer cites the approval for cracked and uncracked concrete of classes C20/25 to C50/60 under ETA-19/0520. For masonry, the product page only mentions solid sand-lime brick, and that by expert opinion for the small sizes M6 and M8. So it does not belong in brick. The load values are in the approval. If you are fastening railings, brackets or steel parts, read these documents beforehand and observe the tightening torque of 45 Nm.

What about Würth or Hilti?

Würth offers all-purpose plugs in the Shark Pro and Shark Twist ranges; individual packs show up on Amazon.de from third-party sellers. Würth recommends its own plug screws such as the ASSY-D, because conventional wood screws can hollow out the plastic. Würth does not publish reliable load values freely online, which is why the brand is missing from the table. We did not find a Hilti wall plug assortment for DIYers on Amazon.de.

Which box suits my home?

For mixed walls in a rented or owned apartment, the fischer Meister-Box DuoPower/DuoTec is the right fit: universal and cavity plugs in one box, screws included. If you do a lot of mounting and already work with the L-Boxx system in your workshop, take the TOX L-Boxx Mini Allround Tri + S. If you have screws and only need plugs, the Upat Dübelbox UB UVD II is enough.

In an attic or with drywall partitions, add a pack of fischer DuoTec 10.

Heavy loads in concrete are a topic of their own. Here the fischer FAZ II Plus is the right fit, selected according to its approval and installation instructions. In perforated brick, injection mortar with a mesh sleeve according to the manufacturer’s specifications is called for instead.

One large box is enough for almost every household. A set of heavy-duty anchors kept in stock, on the other hand, is usually money thrown away, because size and length only become clear on the specific component.

Frequently asked questions

How can I tell what kind of wall I am drilling into?

By the drilling dust and the resistance. Concrete is hard and gray and produces fine dust. In vertically perforated brick, the resistance suddenly drops at a certain depth because the bit hits a cavity. Drywall gives itself away with white powder and a hollow sound. If in doubt, a small test hole in an inconspicuous spot helps.

Which wall plug holds in drywall?

Universal plugs do knot behind the board, but there they only hold light items. Shelves and wall cabinets call for toggle anchors such as the fischer DuoTec 10, for which fischer states a recommended load of 20 to 51 kg, depending on the material and board thickness. Behind it, you need a cavity of at least 40 mm.

How reliable are the kilo ratings on wall plug packs?

They are manufacturer specifications that vary widely depending on the base material. For the DuoPower 8 x 40, fischer states a maximum of 110 kg in concrete, but only 25 kg in vertically perforated brick and 15 kg in drywall. For overhead loads and heavy loads, only the manufacturer's approval and installation instructions count.

What holds in aerated concrete?

Aerated concrete is the trickiest base material. For small universal and DuoPower plugs, fischer states a recommended load of no more than 3 kg in it. For heavy loads in vertically perforated brick and hollow block, fischer specifies an anchor sleeve, threaded rod and injection mortar instead of plastic plugs.

Which screw goes into the wall plug?

According to fischer, the largest permissible screw diameter for the respective plug gives the highest load capacity. The screws included in a box are matched to this. The Upat Dübelbox UB UVD II comes without screws and therefore suits a well-stocked screw box.

Is it worth keeping a set of heavy-duty anchors in stock?

Usually not, because size and length only become clear on the specific component. For heavy loads in concrete, the fischer FAZ II Plus is one suitable option, selected according to its approval and installation instructions, with a tightening torque of 45 Nm. It does not belong in brick; there, injection mortar with a mesh sleeve is called for.

Sources

Where to buy

Shop in:

Sale, delivery, warranty and product safety are the sole responsibility of the respective retailer and manufacturer. All information without guarantee; prices and availability may change.

Links marked as affiliate links earn us a small commission if you buy through them. The price stays the same for you, and our verdict stays independent. As an Amazon Associate we earn from qualifying purchases.

Still undecided?

Keep comparing at your own pace – every article in this category is checked monthly for new and discontinued models.

Share this guide