Contents13 sections
This guide was first published in German on handgetestet.de.
A 100-piece drill bit set looks reassuring on the shelf. What you actually need is usually something else: six good wood bits, a cleanly ground set of HSS-G metal bits and, once concrete comes into play, dedicated SDS-plus hammer drill bits. For shelves and lamps, a small mixed set from a brand-name manufacturer is enough. With reinforced concrete, it is not the bit alone that makes the difference, but the machine behind it.
Why every material wants its own cutting edge
Many bad buys start with the wrong question. Not „Which set is big?“ but „Where do I want to drill?“
You can recognize wood bits by the center point and the spurs on the outside. They keep the hole from wandering and reduce splintering. A metal bit will get through wood too, but it leaves ragged edges.
With metal, the abbreviations tell you a lot. HSS-G stands for ground high-speed steel, the solid basic equipment for steel, sheet metal and non-ferrous metals. HSS-Co also contains cobalt; Alpen specifies 5 percent for its cases. These bits tolerate more heat and are intended for stainless steel and high-strength steels. And titanium? A titanium or TiN coating is just a thin hard layer on regular HSS. Once it is worn off, you are left with an ordinary HSS bit.
A masonry bit with a carbide tip and round shank handles brick and sand-lime brick, with the hammer drill supplying the impact. It is better to start holes in perforated bricks without hammer action. Otherwise the internal webs break.
Drywall needs no hammer action; a wood or metal bit is often enough. The real hold only comes from the right cavity anchor.
Tiles and glass call for spear-shaped carbide tips or diamond bits, also without hammer action. For its tile and glass bits, wolfcraft specifies drilling only in forward (clockwise) rotation, at low speed and with little pressure, and cooling with water.
Concrete is in a league of its own. Here, SDS-plus hammer drill bits belong in a rotary hammer. Hilti and Heller rely on heads with four cutting edges for this, which according to Hilti also drill through rebar.
Not all hammering is equal
A hammer drill handles brick and the occasional few holes in concrete. But if a whole kitchen has to hang on a concrete wall, it costs time and nerves. A rotary hammer strikes with considerably more energy, specified in joules. For its entry-level GBH 2-21, Bosch specifies 2.0 joules and hammer drilling in concrete up to 22 millimeters in diameter. Then there is the chuck: SDS-plus bits only fit an SDS-plus chuck, not a regular drill chuck.
If you already have cordless tools in the basement, take a look at cordless battery systems compared first. A rotary hammer from the same battery family saves you a second charging spot. For wood, drywall and small anchor holes, a good cordless drill is often enough; details are in the cordless drill driver guide.
Before the first hole: where are the cables and pipes?
Under the German standard DIN 18015-3, electrical cables and water pipes should run in defined installation zones. Horizontally, these are 15 to 45 centimeters below the ceiling and above the floor as well as 100 to 130 centimeters above the floor; vertically, 10 to 30 centimeters beside doors, windows and room corners. You should not drill in these strips or on the lines above and below switches and sockets.
Even so, you cannot rely on it. The standard allows exceptions, for example at steel lintels above doors, and in older buildings a lot of things run diagonally. A wall scanner adds extra safety but does not replace a plan. If in doubt: switch off the circuit breaker for the room.
Seven drill bit sets and what they can do
Bosch X-Line TiN, 70 pieces
According to the product page, the case contains 11 TiN-coated metal bits from 1.5 to 6.5 millimeters, six carbide-tipped masonry bits up to 10 millimeters, five wood bits and three spade bits, plus screwdriver bits and sockets. Basic equipment for your first apartment. The metal bits stop at 6.5 millimeters; larger holes in steel mean buying more.
Makita D-46202, 18 pieces
No screwdriver bits, no filler pieces. Makita lists six bits each for wood, metal and masonry in 3, 4, 5, 6, 8 and 10 millimeters, the metal bits made of HSS-G, all with round shanks in one case. If you already have screwdriver bits, this gets you exactly the diameters that actually come up with wall anchors.
DeWalt DT7926 Extreme 2, 29 pieces
A pure metal bit set in an index case, 1 to 13 millimeters in fine increments. It includes 3.3 and 4.2 millimeters, the tap drill sizes for M4 and M5 threads. DeWalt specifies alloyed and unalloyed steels up to 900 N/mm² tensile strength. If you drill three holes a year, you are buying too much here. In a workshop with a tap set, on the other hand, this set is a solid foundation.
Alpen HSS Cobalt, 19 pieces
Cobalt only pays off with stainless steel, for example on railings, sinks or mailboxes. According to the listing, the case with 19 bits from 1 to 10 millimeters is alloyed with 5 percent cobalt and has a self-centering grind. For ordinary mild steel sheet, you are paying for reserves you will hardly need.
Hilti TE-CX Set (6) M1
Hilti describes the TE-CX as an SDS-plus hammer drill bit with four cutting edges and a solid carbide head that, according to the manufacturer, also drills through rebar. According to Hilti, a marking on the head shows whether the bit still has the dimensional accuracy required for anchors. Six bits from 5 to 12 millimeters. Expensive, but the solid choice for reinforced concrete ceilings.
Heller 4Power, 7 pieces
Heller, based in Dinklage, Germany, builds the 4Power as a four-cutter for SDS-plus. The set covers 5, 6, 6, 8, 8, 10 and 12 millimeters, in other words the common anchor sizes plus a spare for each of the sizes needed most often. An alternative to Hilti if concrete and masonry are on the agenda regularly.
wolfcraft Diamantbohrer-Set 8771000
Designed for the bathroom mirror or the towel rail on glazed tiles. The set contains diamond bits from 5 to 10 millimeters and a drilling guide with a water sponge that is meant to prevent slipping on the glaze. For individual holes in glass or mirrors, wolfcraft also offers spear-shaped tile and glass bits individually from 4 to 10 millimeters.
How we would decide
First apartment, hardly any tools in the house: Bosch X-Line, because the screwdriver bits come included. In return, the metal section is small. If a cordless drill and bits are already on hand, the Makita D-46202 is the better fit, with fewer pieces but the common diameters in three materials.
For metalwork in the workshop, we would take the DeWalt DT7926. The Alpen cobalt set only if stainless steel is regularly on the workbench.
Concrete walls and ceilings? Hilti TE-CX or Heller 4Power, but strictly with a rotary hammer. In a hammer drill, even these bits achieve little. For the bathroom, the wolfcraft diamond set is enough; buy glass bits individually as needed.
Quality is revealed less by the number of pieces than by the labeling. Reputable manufacturers state the material (HSS-G, HSS-Co), a standard such as the German DIN 338 and the intended use. If that is missing entirely, it is a warning sign. And if you happen to be equipping your whole workshop from scratch: what counts when buying pliers is explained in the pliers set overview.
According to the manufacturer, the DeWalt set DT70753-QZ contains ten Extreme 2 SDS-plus hammer drill bits from 5 to 12 mm in a stackable ToughCase box, which means it belongs with a rotary hammer.
Frequently asked questions
Which drill bits do you need for which material?
Wood bits have a center point and outer spurs; metal bits are usually made of HSS-G. A masonry bit with a carbide tip handles brick, while tiles and glass need spear-shaped carbide tips or diamond bits used without hammer action. For concrete, SDS-plus hammer drill bits belong in a rotary hammer.
What is the difference between HSS-G, HSS-Co and titanium drill bits?
HSS-G is ground high-speed steel, the solid basic equipment for steel, sheet metal and non-ferrous metals. HSS-Co also contains cobalt, tolerates more heat and is intended for stainless steel. A TiN coating is just a thin hard layer on regular HSS; once it is worn off, you are left with an ordinary bit.
Is a hammer drill enough for concrete?
For brick and the occasional few holes in concrete, yes. But if a whole kitchen has to hang on a concrete wall, it costs time and nerves. A rotary hammer strikes with considerably more energy. SDS-plus bits such as the Hilti TE-CX or Heller 4Power also only fit an SDS-plus chuck.
How do you drill into tiles?
Without hammer action, using diamond or spear-shaped carbide bits. Wolfcraft specifies drilling only in forward (clockwise) rotation, at low speed and with little pressure, and cooling with water. The wolfcraft diamond set 8771000 comes with a drilling guide with a water sponge to prevent slipping on the glaze.
Where should you not drill into a wall?
Under the German standard DIN 18015-3, cables and pipes should run in installation zones, roughly 15 to 45 centimeters below the ceiling and above the floor, and 10 to 30 centimeters beside doors, windows and corners. You cannot rely on this, especially in older buildings. If in doubt, switch off the circuit breaker for the room.
How do you recognize a good drill bit set?
Less by the number of pieces than by the labeling. Reputable manufacturers state the material, such as HSS-G or HSS-Co, a standard such as DIN 338 and the intended use. If that is missing entirely, it is a warning sign. A 100-piece set looks reassuring, but what you actually need is usually something else.
Sources
- Bosch: X-Line drill and screwdriver bit set, TiN-coated, 70 pieces
- Makita: D-46202 drill bit set, 18 pieces, wood/metal/masonry
- DeWalt: DT7926 metal drill bit set, 29 pieces, HSS-G
- Hilti: TE-CX hammer drill bits (SDS Plus)
- Bosch Professional: rotary hammers with SDS plus
- wolfcraft: tile and glass bits
- Baunetz Wissen: cable routing and installation zones under DIN 18015-3
- DeWalt 10-piece Extreme 2 SDS-Plus drill bit set, Tough Case: product details
Where to buy
- Bosch X-Line TiN 70-tlg. (2 607 019 329)Check price at Amazon.deCheck price at Amazon.co.ukCheck price at Amazon.nlCheck price at Amazon.com.beCheck price at Amazon.frCheck price at Amazon.itCheck price at Amazon.esCheck price at Amazon.plCheck price at Amazon.seAvailable in Germany: Amazon.de
- Makita D-46202 18-tlg.Check price at Amazon.deCheck price at Amazon.co.ukCheck price at Amazon.nlCheck price at Amazon.com.beCheck price at Amazon.frCheck price at Amazon.itCheck price at Amazon.esCheck price at Amazon.plCheck price at Amazon.seAvailable in Germany: Amazon.de
- DeWalt DT7926 29-tlg.Check price at Amazon.deCheck price at Amazon.co.ukCheck price at Amazon.nlCheck price at Amazon.com.beCheck price at Amazon.frCheck price at Amazon.itCheck price at Amazon.esCheck price at Amazon.plCheck price at Amazon.seAvailable in Germany: Amazon.de
- Alpen HSS Cobalt 19-tlg. 100219100Check price at Amazon.deCheck price at Amazon.co.ukCheck price at Amazon.nlCheck price at Amazon.com.beCheck price at Amazon.frCheck price at Amazon.itCheck price at Amazon.esCheck price at Amazon.plCheck price at Amazon.seAvailable in Germany: Amazon.de
- Hilti TE-CX Set (6) M1Check price at Amazon.deCheck price at Amazon.co.ukCheck price at Amazon.nlCheck price at Amazon.com.beCheck price at Amazon.frCheck price at Amazon.itCheck price at Amazon.esCheck price at Amazon.plCheck price at Amazon.seAvailable in Germany: Amazon.de
- Heller 4Power 7-tlg.Check price at Amazon.deCheck price at Amazon.co.ukCheck price at Amazon.nlCheck price at Amazon.com.beCheck price at Amazon.frCheck price at Amazon.itCheck price at Amazon.esCheck price at Amazon.plCheck price at Amazon.seAvailable in Germany: Amazon.de
- wolfcraft Diamantbohrer-Set 8771000Check price at Amazon.deCheck price at Amazon.co.ukCheck price at Amazon.nlCheck price at Amazon.com.beCheck price at Amazon.frCheck price at Amazon.itCheck price at Amazon.esCheck price at Amazon.plCheck price at Amazon.seAvailable in Germany: Amazon.de
- DeWalt 10-teiliges Extreme 2 SDS-Plus Bohrerset Tough CaseView at CoolblueAvailable in Germany: Coolblue
Still undecided?
Keep comparing at your own pace – every article in this category is checked monthly for new and discontinued models.






