Black Friday Woche ab 19.11.: unsere Wahl je Ratgeber
Independent buying adviceEvery claim with a sourceNo paid verdictsIn 36 countries1,734 guides and reviews in German How we test
handgetestet
This page in 9 more languages

DeutschNederlandsFrançaisItalianoEspañolPolskiУкраїнськаTürkçeالعربية

Bluetooth Audio Adapters 2026: Receivers and Transmitters

Bluetooth audio adapters 2026: which receiver suits an old hi-fi system, which transmitter suits the TV and what the rules are on a plane.

handgetestet editorial team · Updated November 16, 2026
Contents12 sections

This guide was first published in German on handgetestet.de.

With Bluetooth adapters, the first purchase often goes in the wrong direction. An old stereo system needs a receiver with an RCA output, such as the FiiO BR13; a TV needs a transmitter with an optical input, and a plane needs a battery-powered transmitter with a two-prong plug. Only then do codecs come into play, and the headphones on the other end matter more than the adapter itself.

Transmit or receive? Settle the direction first

A receiver (RX) takes music from your smartphone and passes it by cable to an amplifier, powered speakers or a compact stereo. A transmitter (TX) does the opposite. It connects to the TV, a CD player or the in-flight audio jack on a plane and sends the sound wirelessly to your headphones. Some devices can do both and have a switch for it.

Every Bluetooth device supports the basic SBC codec. Anything beyond that, meaning the various flavors of aptX or LDAC, only works if both sides support it. Twelve South says so explicitly about the AirFly Pro 2: sound quality and latency depend on what the connected headphones can do. So a transmitter with aptX Adaptive does little if your headphones don’t support aptX.

For watching TV, latency matters most. Qualcomm cites around 40 milliseconds for aptX Low Latency, measured on an audio adapter with this encoder. But that only works if both the transmitter and the headphones support aptX Low Latency. Otherwise, you’re back to SBC.

Auracast: new, but not everywhere yet

Auracast is a broadcast principle for Bluetooth. A transmitter broadcasts the sound, and according to the Bluetooth SIG, an unlimited number of devices can listen in without pairing. It’s intended for hearing aids, for muted TVs in waiting areas and for shared listening at home. Often, though, the receiving end is still missing. In the manual for the Audikast 4, Avantree itself admits that few compatible receivers are in circulation so far. If you buy an Auracast transmitter today, check whether your hearing aid or headphones actually support Auracast, or choose a device that can also pair the conventional way.

Four questions before you buy

  • Which ports are free? On an amplifier, an RCA input such as AUX, CD or Tape is enough. On a TV, the optical output is the cleanest source for a transmitter.
  • Does the TV only have HDMI? Then the Audikast 4, for example, needs an HDMI-to-optical converter, according to Avantree.
  • Which codec do your smartphone and headphones support? If they only list SBC, a simple adapter is enough.
  • Where does the power come from? Desktop units run on USB; FiiO specifies 5 V and 1 A for the BR13, and for the BTA30 Pro the manufacturer recommends a 2 A power supply.

Can you use Bluetooth on a plane?

There’s no uniform rule. In 2014, the European Union Aviation Safety Agency (EASA) allowed passengers to use electronic devices throughout the entire flight, but leaves the decision to each airline; crew instructions always take precedence. According to an overview by the German tech publisher heise (as of May 2024), Lufthansa allows Bluetooth headphones even during takeoff and landing, unless the crew says otherwise. British Airways and American Airlines, on the other hand, require devices to stay off during these phases. Check your airline’s rules before you fly.

Five adapters for five jobs

ModelDirectionCodecs according to the manufacturerConnectionsBest for
FiiO BR13ReceiverSBC, aptX, aptX LL, aptX HD, aptX Adaptive, LDACRCA output, optical and coaxial in and out, USB-CStereo system with amplifier
FiiO BTA30 ProReceiver and transmitterReceive: SBC, AAC, aptX, aptX HD, LDAC; transmit: SBC, aptX, aptX HD, aptX LL, LDACRCA output, optical and coaxial in and out, USB-CHi-fi system and TV with one device
1Mii B06S+ReceiverLDAC, aptX HD, aptX LLRCA, 3.5 mm jackCompact stereo, powered speakers
Twelve South AirFly Pro 2Transmitter and receiver, with batteryTransmit: aptX Adaptive, aptX LL, aptX HD, aptX, SBC; receive: aptX HD, aptX, AAC, SBC3.5 mm jackPlane, gym equipment, on the go
Avantree Audikast 4Transmitter, conventional or Auracastnot stated in the manualOptical, 3.5 mm jack, USB-C for powerTV, hearing aids with Auracast

FiiO BR13: the receiver for the living-room system

The BR13 is a desktop unit measuring 98 by 96 millimeters with a small display, buttons and app control. FiiO uses the QCC5125 Bluetooth chip (Bluetooth 5.2) and an ESS DAC; according to the spec sheet, the RCA output delivers 2 volts. There are also optical and coaxial inputs, so a CD player can run through the BR13’s DAC. For an amplifier that has been doing its job for years and simply lacks Bluetooth, this is the obvious addition.

FiiO BTA30 Pro: one device for both directions

The BTA30 Pro receives, transmits and works as a USB DAC on a computer. It takes TV audio over optical and sends it to headphones. According to FiiO, however, when transmitting with LDAC or aptX LL it serves only one device. Its Bluetooth generation, 5.0, is older, and aptX Adaptive is missing. If your hi-fi system and TV sit on the same shelf, though, it saves you a second box.

1Mii B06S+: small, with a volume knob

A pure receiver with RCA and headphone-jack outputs. According to manufacturer specifications reported by the trade site Stereoindex, it uses Bluetooth 5.2, LDAC at up to 990 kbps and aptX HD; a light ring shows the active codec. There are no digital inputs. For powered speakers on a desk or a compact stereo in a kid’s room, that’s enough.

Twelve South AirFly Pro 2: for the in-flight jack

The AirFly plugs into the headphone jack of the seatback screen and transmits to two pairs of headphones at once. Twelve South states a runtime of more than 25 hours and a charging time of under two hours. A switch on the side turns it into a receiver, for example for a system with an AUX jack. For seats with a two-prong jack, there’s an adapter into which, according to the manufacturer, the AirFly has to be pushed firmly; otherwise the connection is loose.

Avantree Audikast 4: TV, hearing aids, Auracast

The Audikast 4 has two operating modes. With conventional pairing, it serves exactly one pair of headphones. In Auracast mode, it transmits to several compatible hearing aids or speakers, encrypted if you like; according to Avantree, that can be added via a firmware update. It connects via optical or the TV’s 3.5 mm jack. It isn’t designed for two conventional pairs of headphones at the same time.

How we would decide

  • Old stereo system with an RCA input: FiiO BR13. If you’re already thinking about a new amplifier, our guide to stereo amplifiers and streamers (in German) covers devices with built-in Bluetooth.
  • Stereo system and TV, one device: FiiO BTA30 Pro, with compromises on codecs.
  • Powered speakers or a compact stereo: 1Mii B06S+.
  • Plane and on the go: Twelve South AirFly Pro 2; for seats with a two-prong jack, pack the matching adapter.
  • TV with a hearing aid: Avantree Audikast 4, if the hearing aid supports Auracast. If you simply want to watch TV quietly, ready-made wireless headphones for the TV (in German) often get you there faster.

Frequently asked questions

What is the difference between a Bluetooth receiver and a transmitter?

A receiver takes music from your smartphone and passes it by cable to an amplifier or powered speakers. A transmitter connects to the TV, a CD player or the in-flight audio jack and sends the sound wirelessly to your headphones. Some devices, such as the FiiO BTA30 Pro, can do both.

Does an aptX adapter help if my headphones only support SBC?

Not much. Every Bluetooth device supports SBC; anything beyond that only works if both sides support it. Twelve South also states for the AirFly Pro 2 that sound quality and latency depend on the connected headphones. If they only list SBC, a simple adapter is enough.

Which adapter works for watching TV without audio lag?

A transmitter with aptX Low Latency, provided your headphones support this codec too. Qualcomm cites around 40 milliseconds for it. The cleanest source on a TV is the optical output; if the TV only has HDMI, the Audikast 4, for example, needs an HDMI-to-optical converter according to Avantree.

Is an Auracast transmitter worth it yet?

Only if you have something on the other end that supports it. According to the Bluetooth SIG, any number of devices can listen in without pairing, but Avantree itself admits that few compatible receivers are in circulation so far. Check whether your hearing aid or headphones support Auracast, or choose a device that can also pair the conventional way.

Can you use Bluetooth headphones on a plane?

Each airline decides for itself; EASA, the European aviation safety agency, generally allowed their use in 2014. According to an overview by the German tech publisher heise, Lufthansa allows Bluetooth headphones even during takeoff and landing, while British Airways and American Airlines don't. Crew instructions always take precedence.

How does the AirFly Pro 2 work on a plane?

It plugs into the headphone jack of the seatback screen and transmits to two pairs of headphones at once. Twelve South states a runtime of more than 25 hours. For seats with a two-prong jack, there's an adapter into which the AirFly has to be pushed firmly.

Sources

Where to buy

Shop in:

Sale, delivery, warranty and product safety are the sole responsibility of the respective retailer and manufacturer. All information without guarantee; prices and availability may change.

Links marked as affiliate links earn us a small commission if you buy through them. The price stays the same for you, and our verdict stays independent. As an Amazon Associate we earn from qualifying purchases.