Contents10 sections
This guide was first published in German on handgetestet.de.
Many people buy a first router that is one size too big. A heavy 1,400-watt machine looks solid, but if you mainly round over table edges and set hinges, you end up fighting your own tool. Most DIYers are better served by a compact multi-function router such as the Makita RT0702C with a plunge base. Only if you cut 20-millimeter-deep grooves in oak or plan a router table do you need more motor.
That is why this guide is sorted by project. Pick the type that suits your workshop.
Four numbers that matter before you buy
- Collet: In Germany, 8 mm is the common shank size for hobby router bits. A 6 mm collet does no harm as a second one. 12 mm or 1/2 inch only pays off for large profile bits in a router table.
- Plunge depth: How deep can the bit plunge? 35 to 40 mm is enough for edges and hardware; for deep grooves and mortises, 55 to 60 mm is more comfortable.
- Speed: It should be adjustable. Large bits need low speed, small edge bits a lot of it.
- Weight: Under 2 kg, you can guide the machine along an edge with one hand. From 3.5 kg, it becomes a two-handed tool.
Cordless or corded? For edge routing, a battery is convenient because no cord drags across the board. For large machines, the power cord remains the honest choice, because long grooves in hardwood drain a small battery quickly. Routing produces fine dust. A vacuum on the dust port is part of the setup, plus a suitable mask from our guide to dust masks. Afterwards, a random orbital sander smooths the routed edges.
Six routers side by side
| Model | Power source | Collet and plunge depth | Speed | Best for |
|---|---|---|---|---|
| Makita RT0702C | Corded, 710 W | 6 and 8 mm, plunge depth 35 mm (router) or 40 mm (edge) | 10,000–34,000 rpm | Beginners, small-scale furniture making |
| Bosch GOF 1250 CE | Corded, 1,250 W | 8 mm (6 mm optional), plunge depth 60 mm | 10,000–24,000 rpm | Furniture makers with deep grooves |
| Festool OF 1010 REBQ | Corded, 1,010 W | 6 to 8 mm, plunge depth 55 mm | 9,500–23,000 rpm | Precise work with a guide rail |
| Triton MOF001 | Corded, 1,400 W | up to 1/2 inch, plunge depth 59 mm | 8,000–21,000 rpm | Router table and large profiles |
| Metabo FMV 18 LTX BL 8 | 18 V battery (CAS) | 6 and 8 mm, plunge depth 40 mm | 4,800–29,000 rpm | Edge work without a cord |
| Einhell TP-RO 18 Set Li BL | 18 V battery (Power X-Change) | 6 and 8 mm, plunge depth 35/40 mm | 10,000–30,000 rpm | Occasional users with Einhell batteries |
All figures according to the manufacturers. Scope of delivery and accessories differ considerably from set to set, so checking the exact item number saves you trouble.
You are just starting out and want to try everything
Makita RT0702C
The small Makita has been the classic among one-handed routers for years. According to the manufacturer, it delivers 710 watts and runs between 10,000 and 34,000 revolutions per minute, with collets for 6 and 8 mm included. It gets interesting in the RT0702CX2J version, which adds a plunge base and further routing modules. With 35 mm of plunge depth as a router, deep grooves are where it reaches its limit. For shelves, drawer bottoms and rounded edges, that is enough.
You build furniture and need depth
Bosch GOF 1250 CE Professional
With 1,250 watts and 60 mm of plunge depth, the Bosch has enough reserves for back-panel grooves in solid wood. Bosch cites constant-speed electronics and fine depth adjustment. Only the 8 mm collet is included; you buy a 6 mm collet separately if needed. At 3.6 kg, you guide it with both hands. If you build two or three pieces of furniture a year, this is the right choice.
Festool OF 1010 REBQ
The Festool costs considerably more than the Bosch. It offers 55 mm of plunge depth, fine adjustment to a tenth of a millimeter and electronics with constant speed and temperature monitoring. According to the manufacturer, there is also an LED light in the plunge base and the detachable cord. What mainly justifies the extra cost is the system. If you already own a Festool guide rail, you can rout straight grooves with it without a fence of your own. Without that connection, we would rather go for the Bosch.
You are planning a router table
Triton MOF001
Under a tabletop, the Triton shows its strength. According to the manufacturer, the cutting depth can be adjusted from above with a winder when table-mounted, without you having to reach under the table. It has 1,400 watts, 59 mm of plunge depth and accepts bits with shanks up to half an inch. Around 4.8 kg is a serious weight freehand, though. As the only router in the house, it is too heavy for many people; as a table machine, on the other hand, it is very well thought out.
You mainly work on edges
Metabo FMV 18 LTX BL 8
One kilo without the battery. The Metabo is a pure edge router with a brushless motor, 40 mm of plunge depth and a wide speed range of 4,800 to 29,000 revolutions. According to Metabo, the parallel fence, guide roller, copying flange and both collets are included, but not the battery and charger. It runs on all 18-volt batteries of the CAS system, including those of other CAS brands. There is no plunge base, so it is not intended for grooves in the middle of a board.
You rarely rout and already have batteries
Einhell TP-RO 18 Set Li BL
The Einhell set comes with a router attachment and an edge attachment, plus a parallel fence, a circle-cutting pin and a copying sleeve. The specifications according to the manufacturer: 18 volts, brushless, 10,000 to 30,000 revolutions, 35 mm of plunge depth as a router and 40 mm as an edge router. The set mainly makes sense for people who already have Power X-Change batteries on the shelf. If you first have to buy a battery and charger, you quickly end up at the price of a corded machine with more power. You can read more about battery platforms in our guide to cordless tool battery systems.
And the router bit set?
Cheap 30-piece sets look like a lot. In practice, most DIYers use four or five bits: an 8 mm and a 12 mm straight bit, a roundover bit with a bearing, a flush-trim bit and perhaps a chamfer bit. It is better to buy these individually with carbide cutting edges and to make sure the shank fits the collet. An 8 mm bit belongs in an 8 mm collet, not in a 1/4-inch collet, which measures 6.35 mm. Sounds trivial, but it is a classic bad buy.
How we would decide
- First router, mixed projects: Makita RT0702C, ideally with the plunge base (RT0702CX2J).
- Regular furniture making with deep grooves: Bosch GOF 1250 CE.
- Existing Festool system with guide rail: Festool OF 1010 REBQ.
- Router table as the goal: Triton MOF001.
- Cordless edge work in the 18-volt CAS system: Metabo FMV 18 LTX BL 8.
- Occasional jobs with existing Einhell batteries: Einhell TP-RO 18 Set.
By the way, a router does not replace a saw. If you want to cut panels to size, you will find help in our guide to plunge saws and circular saws.
Frequently asked questions
Which collet does a router need?
In Germany, 8 mm is the common shank size for hobby router bits, and a 6 mm collet does no harm as a second one. 12 mm or 1/2 inch only pays off for large profile bits in a router table. What matters is that the shank and collet match: an 8 mm bit does not belong in a 1/4-inch collet, which measures 6.35 mm.
How much plunge depth does a router need?
For edges and hardware, 35 to 40 mm is enough. For deep grooves and mortises, 55 to 60 mm is more comfortable. The Makita RT0702C manages 35 mm as a plunge router, the Bosch GOF 1250 CE 60 mm and the Festool OF 1010 REBQ 55 mm.
Cordless or corded router?
For edge routing, a battery is convenient because no cord drags across the board. For large machines, the power cord remains the honest choice, because long grooves in hardwood drain a small battery quickly. Cordless tools such as the Metabo FMV 18 LTX BL 8 or the Einhell set mainly pay off if you already own batteries.
How heavy should a router be?
Under 2 kg, you can guide the machine along an edge with one hand; from 3.5 kg, it becomes a two-handed tool. The Bosch GOF 1250 CE weighs 3.6 kg, the Triton MOF001 around 4.8 kg. A heavy machine used purely for edge work tends to make the job more tiring.
Is a large router bit set worth it?
Cheap 30-piece sets look like a lot, but most DIYers use four or five bits: straight bits in 8 and 12 mm, a roundover bit with a bearing, a flush-trim bit and perhaps a chamfer bit. It is better to buy these individually with carbide cutting edges.
Which router is suitable for a router table?
That is where the Triton MOF001 shows its strength. According to the manufacturer, the cutting depth can be adjusted from above with a winder when table-mounted. It has 1,400 watts, 59 mm of plunge depth and accepts bits with shanks up to half an inch. Freehand, on the other hand, it is heavy at around 4.8 kg.
Sources
- Makita: RT0702CX2J multi-function router
- Bosch Professional: GOF 1250 CE
- Festool: OF 1010 REBQ-Plus
- Triton: MOF001 precision router
- Metabo: FMV 18 LTX BL 8
- Einhell: TP-RO 18 Set Li BL
Where to buy
- Makita RT0702CX2JCheck price at Amazon.deCheck price at Amazon.co.ukCheck price at Amazon.nlCheck price at Amazon.com.beCheck price at Amazon.frCheck price at Amazon.itCheck price at Amazon.esCheck price at Amazon.plCheck price at Amazon.seAvailable in Germany: Amazon.de
- Bosch Professional GOF 1250 CECheck price at Amazon.deCheck price at Amazon.co.ukCheck price at Amazon.nlCheck price at Amazon.com.beCheck price at Amazon.frCheck price at Amazon.itCheck price at Amazon.esCheck price at Amazon.plCheck price at Amazon.seAvailable in Germany: Amazon.de
- Festool OF 1010 REBQCheck price at Amazon.deCheck price at Amazon.co.ukCheck price at Amazon.nlCheck price at Amazon.com.beCheck price at Amazon.frCheck price at Amazon.itCheck price at Amazon.esCheck price at Amazon.plCheck price at Amazon.seAvailable in Germany: Amazon.de
- Triton MOF001Check price at Amazon.deCheck price at Amazon.co.ukCheck price at Amazon.nlCheck price at Amazon.com.beCheck price at Amazon.frCheck price at Amazon.itCheck price at Amazon.esCheck price at Amazon.plCheck price at Amazon.seAvailable in Germany: Amazon.de
- Metabo FMV 18 LTX BL 8Check price at Amazon.deCheck price at Amazon.co.ukCheck price at Amazon.nlCheck price at Amazon.com.beCheck price at Amazon.frCheck price at Amazon.itCheck price at Amazon.esCheck price at Amazon.plCheck price at Amazon.seAvailable in Germany: Amazon.de
- Einhell TP-RO 18 Set Li BL (Solo, ohne Akku)Check price at Amazon.deCheck price at Amazon.co.ukCheck price at Amazon.nlCheck price at Amazon.com.beCheck price at Amazon.frCheck price at Amazon.itCheck price at Amazon.esCheck price at Amazon.plCheck price at Amazon.seAvailable in Germany: Amazon.de
