Black Friday Woche ab 19.11.: unsere Wahl je Ratgeber
Independent buying adviceEvery claim with a sourceNo paid verdictsIn 36 countries1,734 guides and reviews in German How we test
handgetestet

Smart Garage Door Opener Retrofit 2026: Opener or Module

Making a garage door opener smart: retrofit module or new opener? Meross, Shelly, Hörmann and Chamberlain with app, voice control and photo eye.

handgetestet editorial team · Updated November 17, 2026
Contents11 sections

This guide was first published in German on handgetestet.de.

If the old opener still runs flawlessly, you do not need a new one. A retrofit module such as the Meross MSG100HK or a Hörmann Bluetooth receiver makes it smart for a fraction of the money; even so, a complete opener often ends up in the shopping cart. A Hörmann ProMatic 4 or a Chamberlain ML810EV-Smart only makes sense if the old unit is getting weak or noisy, or if the door has so far been moved by hand.

A garage door, however, is not a light switch. It moves several dozen kilos, and with a smartphone it can suddenly be closed even when nobody is standing in front of it. This is exactly where a well-thought-out solution parts ways with a merely convenient one.

Six solutions for a smart garage door

ModelTypeKey specs according to the manufacturerFor whom
Meross MSG100HKRetrofit module2.4 GHz Wi-Fi, door sensor, HomeKit, Alexa, Google AssistantExisting opener with push-button terminal
Shelly 1 Gen4Relay for installationPotential-free (dry) contact, Wi-Fi, Bluetooth, Zigbee, MatterTinkerers with a qualified electrician and a smart home hub
Hörmann HET/S 2 BLEBluetooth receiverImpulse control via the BlueSecur appHörmann openers without built-in Bluetooth
Hörmann ProMatic 4Complete opener600 N, up to 20 cm/s, doors up to 5 m wide, HCP interfaceNew purchase with the Hörmann radio system
Hörmann SupraMatic E Serie 4Complete opener650 N, up to 25 cm/s, Bluetooth as standard, HCPAnyone who wants app control from the factory
Chamberlain ML810EV-SmartComplete opener800 N, doors up to 110 kg, myQ gateway and photo eye includedRemote access on the go without extra purchases

Terminals, photo eye, network: four checks in the garage

Does your opener have push-button terminals? Almost all retrofit modules mimic the wall button. Meross includes a test cable for this: use it to bridge the two push-button terminals on the opener. If the door moves, the module is compatible according to the manufacturer. Is there a photo eye? Hörmann states in its own opener catalog that an additional photo eye is required when the door is operated without a line of sight to it. Remote control via app is exactly that case.

Then the network. Meross only works on 2.4 GHz Wi-Fi, Chamberlain requires a network cable to the router for myQ, and Hörmann’s Bluetooth solutions only work within range of the phone. Finally, the platform: HomeKit, Alexa, Google or a dedicated hub. For help with this choice, see the article on the smart home hub.

Safety and standards: what the manufacturers require

In Europe, power-operated doors fall under the product standard EN 13241, while EN 12453 governs safety in use. Hörmann states that the operating forces of its openers have been tested by independent institutes in accordance with DIN EN 13241-1. According to the manufacturer, the openers stop at obstacles via an automatic safety cut-off; Hörmann nevertheless recommends a non-contact photo eye.

Chamberlain is clear in the installation manual for the ML series: installation should be carried out by a competent person familiar with EN 13241, EN 12604 and EN 12453. Electrical work belongs in the hands of a qualified electrician, and power-operated doors must be inspected by a specialist before first use and at least once a year. So even if you only connect a module to two terminals, you should know whether the opener’s force cut-off and photo eye still work properly. A smart command is only as safe as the opener that carries it out.

Meross MSG100HK: the simple route for existing openers

The module connects to the opener’s push-button terminals, and a magnetic sensor on the door reports open or closed. According to the manufacturer, Apple HomeKit, Siri, Alexa and Google Assistant are supported. For HomeKit on the go, you need a home hub such as a HomePod or Apple TV. Without „HK“ in the name, HomeKit does not work. Several doors? For that, Meross names the MSG200, a variant for up to three doors.

Shelly 1 Gen4: flexible, but not a stick-on gadget

A small relay with a potential-free (dry) contact. According to Shelly, it runs on 110 to 240 volts AC as well as on 12 and 24 to 48 volts DC and speaks Wi-Fi, Bluetooth, Zigbee and Matter. For the door position, Shelly recommends a reed contact via the separate Plus Add-on. None of the six solutions is cheaper. In return, it requires planning and, with mains voltage, a qualified electrician.

Hörmann HET/S 2 BLE: Bluetooth for older Hörmann openers

With this receiver, the BlueSecur app controls garage and driveway gate openers by impulse, turning the phone into a hand transmitter. That does not work when you are away from home.

Bluetooth only reaches as long as you are on site. Hörmann also points out that some app functions may require in-app purchases.

Hörmann ProMatic 4: a solid entry point with room to grow

600 N of pulling and pushing force, 750 N for short periods, and it opens sectional doors at up to 20 cm/s: that is how Hörmann describes the ProMatic 4. Bluetooth is not included from the factory; the HET-BLE adds it. Modules from smart home systems can connect via the HCP interface. That is enough for most single garages.

Hörmann SupraMatic E Serie 4: app control from the factory

Bluetooth receiver as standard and, according to the manufacturer, up to 25 cm/s. With an optional climate sensor, the SupraMatic E can move to a ventilation position. Since 2025, the SupraMatic H4 sits above it with up to 1,000 N, which Hörmann designs for smart home systems such as Homematic, Delta Dore and homee. For a normal double garage, that is usually more opener than necessary.

Chamberlain ML810EV-Smart: remote access included

The myQ gateway and photo eye come in the box. According to the manual, the belt-drive opener delivers 800 N and moves doors up to 110 kg; the larger ML1040EV-Smart manages 1,000 N and 140 kg. One detail from the manual shows how the manufacturer thinks: without a connected photo eye, the door can only be opened via myQ, not closed. A free network port on the router is required for the gateway.

How we would decide

If the opener works and you use HomeKit, Alexa or Google, go with the Meross MSG100HK. Do the terminal test first and check whether a photo eye is present. If you already have a smart home hub and a qualified electrician at hand, the Shelly 1 Gen4 with a reed contact is a good fit. For a Hörmann opener without Bluetooth, operated only on site: HET/S 2 BLE. If a new opener is needed and a specialist company installs the door, it is the Hörmann ProMatic 4, or the SupraMatic E Serie 4 with app control from the factory. Remote access without tinkering comes with the Chamberlain ML810EV-Smart.

If tradespeople are working in the garage or carport anyway, it is worth planning the wiring at the same time, for example for a wallbox. Anyone who opens the door via app usually wants to integrate the front door as well; what applies there is covered in the article on the smart lock. Wireless kits for monitoring the garage and house are presented in the overview of alarm systems.

Frequently asked questions

Can you make an existing garage door opener smart?

Usually yes, if the opener has push-button terminals, because almost all retrofit modules mimic the wall button. Meross includes a test cable: use it to bridge the two push-button terminals. If the door moves, the module is compatible according to the manufacturer.

Does a smart garage door need a photo eye?

Hörmann states in its own catalog that an additional photo eye is required when the door is operated without a line of sight to it, and remote control via app is exactly that case. With the Chamberlain ML810EV-Smart, the door can only be opened via myQ without a connected photo eye, not closed.

Which network does a smart garage door opener need?

That depends on the solution. Meross only works on 2.4 GHz Wi-Fi, and Chamberlain requires a network cable to the router for myQ. Hörmann's Bluetooth solutions only work within range of the phone, not when you are away from home. After that, the platform matters: HomeKit, Alexa, Google or a dedicated hub.

Does the Meross garage door opener work with Apple HomeKit?

According to the manufacturer, the Meross MSG100HK supports Apple HomeKit, Siri, Alexa and Google Assistant. Without "HK" in the name, HomeKit does not work. For HomeKit on the go, you need a home hub such as a HomePod or Apple TV. For up to three doors, Meross names the MSG200.

Who may install a garage door opener?

In its installation manual, Chamberlain requires a competent person familiar with EN 13241, EN 12604 and EN 12453. Electrical work belongs in the hands of a qualified electrician, and power-operated doors must be inspected by a specialist before first use and at least once a year.

What is the difference between the Hörmann ProMatic 4 and the SupraMatic E Serie 4?

The ProMatic 4 delivers 600 N and opens sectional doors at up to 20 cm/s; Bluetooth is not included from the factory but can be added with the HET-BLE. The SupraMatic E Serie 4 has the Bluetooth receiver as standard, reaches up to 25 cm/s and, with an optional climate sensor, can move to a ventilation position.

Sources

Where to buy

Shop in:

Sale, delivery, warranty and product safety are the sole responsibility of the respective retailer and manufacturer. All information without guarantee; prices and availability may change.

Links marked as affiliate links earn us a small commission if you buy through them. The price stays the same for you, and our verdict stays independent. As an Amazon Associate we earn from qualifying purchases.