Contents12 sections
This guide was first published in German on handgetestet.de.
Many people buy the tool belt with the most pockets and then end up carrying around three kilos of tools they never need. The smarter approach is the reverse order. First lay out on the table the five or six items you really need for every task, then find the pouch to go with them. For electricians and anyone who often works on installations, the Milwaukee pouch 48-22-8112 with its own belt is, in our assessment, the most well-rounded choice; if you screw battens together and drive nails on the weekend, the simple nylon belt from Stanley will serve you well.
What kind of tool belt user are you?
Three groups are easy to tell apart. The DIYer straps on the belt for a few hours, for example while building a garden shed. They need nail pockets, a pocket for the tape measure and a loop for the hammer. Nothing more.
The electrician or installer carries many small tools: screwdrivers in several sizes, wire strippers, voltage tester, cable knife. What counts for them are narrow slots and a pouch that stays upright when set down on a ladder step. Finally, carpenters and drywall installers carry heavy loads all day. From about two kilos at the waist, suspenders become worthwhile, because then the hips are no longer carrying the weight alone.
Leather or nylon, loop or clip
The question of material is often turned into a matter of faith. It is really a question of how you use it. Nylon fabric is rated in denier, meaning the thickness of the yarn: 600 denier is common on inexpensive belts, and Milwaukee specifies 1680 denier for its pouches. The thicker fabric is stiffer, the pockets stay open, and pointed screwdrivers take longer to bore through the bottom. Nylon absorbs hardly any moisture and can be wiped clean.
Leather is heavier and needs care now and then. In return, it shapes itself to the contents over time, and a leather nail pocket handles constant grabbing with wet or dirty hands well. Inexpensive leather aprons usually use split leather or suede, not the smooth full-grain leather of expensive carpenter’s belts. That is not a flaw, but it should not come as a surprise.
In everyday use, two details matter more than the material. The hammer holder should be made of metal, because a fabric loop stretches out under the hammer head after a few weeks. And the attachment: fixed belt pouches with a loop sit steady but can only be moved by threading them off. Pouches with hook-and-loop or clip fastening switch sides faster but are more likely to wobble. Left-handers should make sure the hammer loop and tape measure pocket can move to the right side.
A quick measurement helps. The belt size is almost always listed in inches. 40 inches is about 102 centimeters, and over a winter jacket every waistline gets a few centimeters wider.
Seven belts and pouches compared
Milwaukee 48-22-8112: the pouch for lots of small parts
Milwaukee specifies 15 pockets for this electrician’s pouch, plus a quick-adjust belt, a carrying handle and a metal tape measure clip. One pocket is lined with plastic so that a jab saw or awl cannot poke through. According to the manufacturer, the bottom is designed so the pouch stays upright on a flat surface. The loop takes belts up to 3 inches wide, so most padded work belts fit too. It is not cheap. For someone who stands at a distribution panel every day, though, we think the organization is still worth the extra cost.
Milwaukee 48-22-8120: the complete rig
Belt, two pouches and suspenders in one package, with 24 pockets. The belt is padded and, according to Milwaukee, fits waist sizes from 30 to 53 inches, and the suspenders have a pocket for your phone. According to retailer information, the set weighs about two kilos, empty. If you only work occasionally, you are carrying a lot of weight and a lot of money around with this one.
Stanley 1-96-178: simple and affordable
The classic for home use. According to retailer information, it is made of 600 denier fabric and has a metal hammer loop, a tape measure pocket, several pockets of different sizes and a padded back. It is about 60 centimeters wide. Nails, screws, pencil and utility knife fit in it comfortably, but for an electrician with twelve screwdrivers it is not really the right choice.
Kunys AP-1300: leather for timber construction
According to retailer information, the suede or split leather apron has three nail pockets turned inward, a center pocket for a tape measure or tools, and two small pockets. Two hammer loops are made of metal, and the stress points are reinforced. Everything is held by a 50-millimeter-wide nylon belt with a metal twist buckle, fitting 29 to 40 inches. With a winter jacket and a sturdy build, that quickly gets tight.
Engelbert Strauss e.s.motion Workertasche: for your own belt
Not a complete solution but a single nylon pouch (the name translates as „worker pouch“) that attaches to an existing belt with hook-and-loop straps. According to the listing, it measures about 19.5 by 21 centimeters. If you already wear a good leather belt and are only looking for a pocket for bits, pencil and knife, you need nothing more.
Dickies 5-Fächer-Werkzeugtasche: canvas instead of synthetic fiber
A single-sided pouch (the name means „5-pocket tool pouch“) made of cotton canvas with two large main pockets, a pliers pocket and tool loops. According to retailer information, the belt ranges from 32 to 52 inches, so it also fits over thick clothing. After a few months, canvas looks worn and tends to soak up moisture more than nylon. For occasional use, that hardly matters.
Kunys Hosenträger: relief you can add later
Five-centimeter-wide suspenders (Hosenträger) in a tape measure pattern, adjustable, with steel clips. They clip onto the belt and shift part of the load to the shoulders. That helps if the belt keeps slipping. It does not help against packing the wrong things.
How we would decide
- Electrical work, installation, lots of screwdrivers: Milwaukee 48-22-8112.
- All day on the construction site with heavy tools: Milwaukee 48-22-8120 with suspenders.
- Garden shed, carport, occasional assembly: Stanley 1-96-178.
- Lots of nailing, a love of leather: Kunys AP-1300, but measure your waist first.
- Already have your own belt: the Workertasche from Engelbert Strauss.
What goes into the pockets influences the choice more than any brand. Which pliers prove their worth on the belt is covered in our guide to pliers sets. If you climb steps with a full belt, you should also keep the right ladder and safe work shoes in mind.
Frequently asked questions
Is a leather or a nylon tool belt better?
It depends on how you use it. Thick nylon fabric is stiff, keeps the pockets open, absorbs hardly any moisture and can be wiped clean. Leather is heavier and needs care, but it shapes itself to the contents and handles being grabbed with wet hands well. Inexpensive leather aprons are usually made of split leather or suede.
What does denier mean on a tool belt?
Denier indicates the thickness of the yarn in the nylon fabric. 600 denier is common on inexpensive belts; Milwaukee specifies 1680 denier for its pouches. The thicker fabric is stiffer, and pointed screwdrivers take longer to bore through the bottom.
What should you look for in a hammer holder?
It should be made of metal, because a fabric loop stretches out under the hammer head after a few weeks. Left-handers should also make sure the hammer loop and tape measure pocket can move to the right side. That is easier with hook-and-loop or clip attachment than with pouches that are threaded on permanently.
When do you need suspenders for a tool belt?
From about two kilos at the waist, suspenders become worthwhile, because then the hips are no longer carrying the weight alone. The Kunys Hosenträger with steel clips are a good retrofit. They help if the belt keeps slipping; they do not help against packing the wrong things.
What belt size do you need?
The belt size is almost always listed in inches. 40 inches is about 102 centimeters, and over a winter jacket every waistline gets a few centimeters wider. The Kunys AP-1300 goes up to 40 inches, the Dickies belt up to 52 inches.
Sources
- Milwaukee Tool: Electricians Work Pouch w/ Quick Adjust Belt 48-22-8112
- Milwaukee Tool: Contractor Work Belt w/ Suspension Rig 48-22-8120
- Wickes (retailer): Stanley 1-96-178 Tool Apron
- Power Tool Centre (retailer): Kunys AP-1300
- Engelbert Strauss: Tool belt e.s.tool concept
Where to buy
- Milwaukee 48-22-8112Check price at Amazon.deCheck price at Amazon.co.ukCheck price at Amazon.nlCheck price at Amazon.com.beCheck price at Amazon.frCheck price at Amazon.itCheck price at Amazon.esCheck price at Amazon.plCheck price at Amazon.seAvailable in Germany: Amazon.de
- Milwaukee 48-22-8120Check price at Amazon.deCheck price at Amazon.co.ukCheck price at Amazon.nlCheck price at Amazon.com.beCheck price at Amazon.frCheck price at Amazon.itCheck price at Amazon.esCheck price at Amazon.plCheck price at Amazon.seAvailable in Germany: Amazon.de
- Stanley 1-96-178Check price at Amazon.deCheck price at Amazon.co.ukCheck price at Amazon.nlCheck price at Amazon.com.beCheck price at Amazon.frCheck price at Amazon.itCheck price at Amazon.esCheck price at Amazon.plCheck price at Amazon.seAvailable in Germany: Amazon.de
- Kunys AP-1300Check price at Amazon.deCheck price at Amazon.co.ukCheck price at Amazon.nlCheck price at Amazon.com.beCheck price at Amazon.frCheck price at Amazon.itCheck price at Amazon.esCheck price at Amazon.plCheck price at Amazon.seAvailable in Germany: Amazon.de
- Engelbert Strauss e.s.motion WorkertascheCheck price at Amazon.deCheck price at Amazon.co.ukCheck price at Amazon.nlCheck price at Amazon.com.beCheck price at Amazon.frCheck price at Amazon.itCheck price at Amazon.esCheck price at Amazon.plCheck price at Amazon.seAvailable in Germany: Amazon.de
- Dickies 5-Fächer-WerkzeugtascheCheck price at Amazon.deCheck price at Amazon.co.ukCheck price at Amazon.nlCheck price at Amazon.com.beCheck price at Amazon.frCheck price at Amazon.itCheck price at Amazon.esCheck price at Amazon.plCheck price at Amazon.seAvailable in Germany: Amazon.de
- Kunys Hosenträger MaßbandCheck price at Amazon.deCheck price at Amazon.co.ukCheck price at Amazon.nlCheck price at Amazon.com.beCheck price at Amazon.frCheck price at Amazon.itCheck price at Amazon.esCheck price at Amazon.plCheck price at Amazon.seAvailable in Germany: Amazon.de
Still undecided?
Keep comparing at your own pace – every article in this category is checked monthly for new and discontinued models.






