Contents12 sections
This guide was first published in German on handgetestet.de.
The photo glows on screen, and the print comes out of the printer dark with a slight green cast. Before you blame the printer, put your screen to the test. A monitor calibrator measures what your screen actually displays and creates a color profile from it. For photographers who also print, we consider the Calibrite Display Pro HL the right choice, because it lets you set the white point and brightness freely and measures ambient light. If you only work for screen and web, the Display 123 will do. And if you want to profile your own photo printer, you need a different device: the ColorChecker Studio.
What a measuring device like this actually does
There are two steps. First, the monitor is brought to target values, that is, brightness, white point and tone curve. Then the software displays a series of color patches, the measuring device placed on the screen reads them, and the result is an ICC profile. The European Color Initiative (ECI) describes exactly this process in its guide to digital photography: the profile is stored in the operating system as the monitor profile, and programs such as Photoshop use it to render images correctly on screen. Without a measuring device, the guide says in essence, image display is flying blind.
One difference that matters when buying: software or hardware calibration. With the software variant, the correction sits in the computer. According to EIZO, it usually works with the graphics card’s 8-bit tables; if you lower the color temperature to 5000 kelvin, for example, fewer than the original gradations remain for green and blue, and gradients can show banding. With hardware calibration, the values are written to the monitor’s own table, and the number of gradations is preserved. This requires a monitor that has this feature. Calibrite lists the Display Pro HL, Display Plus HL and ColorChecker Studio as compatible with this kind of third-party hardware calibration, but not the Display 123.
White point and brightness decide how the print turns out
Paper does not glow. For matching against prints, EIZO states that a photo viewed indoors in the evening corresponds to roughly 80 to 100 cd/m² on the monitor; the print preset in EIZO’s ColorNavigator software is 100 cd/m², 5500 kelvin and gamma 2.2. If you edit at 250 cd/m² instead, the same print next to the screen will quickly look too dark.
When it comes to the white point, there are two camps. According to the ECI, two standard illuminants are established: D65 at 6500 kelvin and D50 at 5000 kelvin. Because D50 lighting has become the standard in prepress and printing, the ECI recommends calibrating the monitor to D50 for this work. In its instructions, Calibrite lists D65 as the general target and D50 as the target for print conditions. In practice, this means a calibrator for print matching must offer D50 or a custom white point. According to Calibrite, the Display 123 can only do D65 or the monitor’s native white point. That is enough for on-screen work. Not for comparing with paper.
The room plays a part, too. According to the ECI, the surroundings of the monitor should be 10 to 60 percent as bright as a white area on the screen, with neutral gray or white walls. As for color space: for the internet and office use, the ECI recommends sRGB as the output color space. As a working color space for print, it calls eciRGB a good choice and Adobe RGB a standard in widespread use worldwide; sRGB lacks some printable colors, especially in the cyans. Which monitors cover these color spaces at all is covered in our guide monitors for photo and video editing.
Six calibrators available in 2026
| Model | Measuring range and displays according to the manufacturer | White point and extras | Best for |
|---|---|---|---|
| Calibrite Display 123 | up to 1,000 nits, standard monitors and laptops, up to 2 screens | D65 or native; brightness „Native“ or „Photo“ | screen and web, without print matching |
| Calibrite Display Pro HL | up to 3,000 nits, LCD, mini-LED, OLED, Apple XDR; up to 4 screens | D50 to D75, custom or measured white point; ambient light, uniformity, projector | photography with occasional printing |
| Calibrite Display Plus HL | up to 10,000 nits, including QD-OLED and XDR HDR; up to 4 screens | same as Pro HL; according to Calibrite, approved for Apple’s Pro Display Calibrator | very bright HDR and Apple XDR displays |
| Calibrite ColorChecker Studio | spectrophotometer, up to 1,000 nits; monitor, projector, printer | printer profiles for RGB and CMYK printers; ColorChecker Classic Mini included | your own printer profiles for paper and ink |
| Datacolor Spyder | up to 3,000 cd/m², including OLED, QD-OLED, mini-LED, Apple XDR | ambient light measurement, 11 brightness levels; upgradable to SpyderPro via software | getting started with room to upgrade later |
| Datacolor SpyderPro | up to 12,000 cd/m², including OLED, QD-OLED, mini-LED, Apple XDR | 3D LUT export (.cube) for Rec.709, Rec.2020, DCI-P3; print and device preview | video, multi-screen workstations |
Calibrite Display 123
The small yellow device is designed around three steps: connect it, choose the monitor and brightness, save the profile. Calibrite specifies a measuring range of up to 1,000 nits and support for up to two screens at one workstation. For someone preparing photos for the web or social media, that is enough. If you want to hold prints up next to the monitor, you will hit the limit on the white point.
Calibrite Display Pro HL
Our recommendation for photographers. According to Calibrite, the sensor measures up to 3,000 nits and handles OLED, mini-LED and Apple XDR displays. In the PROFILER software, white point, brightness, contrast and gamma can be set freely; on top of that, there is an ambient light measurement that, according to the manufacturer, determines the right brightness for comparing with prints, a correction for reflections on the screen surface (Flare Correct) and a uniformity check across the panel. For projectors, the housing has a tripod thread.
Calibrite Display Plus HL
Technically the big brother: according to Calibrite, the sensor reaches up to 10,000 nits. According to the manufacturer, from macOS 26.4 it can be used directly in Apple’s Pro Display Calibrator, with all of Apple’s presets. For a photo monitor without high HDR peak brightness, the 3,000 nits of the Pro HL are enough. The Plus HL makes sense for HDR screens with very high peak values.
Calibrite ColorChecker Studio
Not a colorimeter but a spectrophotometer. It profiles monitors and projectors, but above all printers: you print a test chart and measure it, the software generates a second chart from it, and the end result is a profile for exactly this combination of printer, ink and paper. According to Calibrite, an optional third chart adds skin tones, neutral gray and grayscale. A ColorChecker Classic Mini is included. The effort only pays off if you print regularly yourself and switch papers; which printers are suitable is covered in our photo printer (in German) guide.
Datacolor Spyder
According to the manufacturer, the standard model of Datacolor’s current lineup measures up to 3,000 cd/m², and Datacolor explicitly mentions OLED and QD-OLED. It measures ambient light and offers eleven brightness levels and a before-and-after comparison. The upgrade path is interesting: according to Datacolor, a software upgrade turns the Spyder into a SpyderPro, without a new measuring device.
Datacolor SpyderPro
Datacolor specifies up to 12,000 cd/m². More important than the number are the features: export of a 3D LUT in .cube format for Rec.709, Rec.2020 and DCI-P3, for video monitors, for example; matching of multiple screens (StudioMatch); and a preview of how an image will look on other devices or in print. According to Datacolor, a more thorough calibration level delivers 30 percent more accuracy on average. For pure photo work on a single monitor, that is more than you need.
Which device for which workstation?
- Photos for web and screen, one or two monitors: Calibrite Display 123.
- Photo editing with prints from a lab or your own printer: Calibrite Display Pro HL, white point around D50, brightness around 100 cd/m².
- Your own printer profiles for multiple papers: ColorChecker Studio instead of a second colorimeter.
- Video with a LUT workflow or matching multiple screens: Datacolor SpyderPro.
- Start simple, upgrade later: Datacolor Spyder.
- HDR monitor with very high peak brightness or Apple Pro Display XDR: Calibrite Display Plus HL.
How often to remeasure, and what about X-Rite?
Monitors drift. For graphics work, EIZO recommends recalibrating at least every 200 to 300 operating hours. Calibrite recommends every three to four weeks. A date in your calendar is enough.
And X-Rite? Since the photo business was handed over, the well-known i1Display devices have been sold under the Calibrite name; according to its own announcement, X-Rite continues to manufacture the measuring devices. An older i1Display Pro therefore does not have to go into the closet: Calibrite lists it in a compatibility notice for its software, while according to the same notice the i1Pro 2 and i1Pro 3 systems and the ColorMunki Smile are not compatible. It is similar with Datacolor: according to the manufacturer, the SpyderX and Spyder X2 can be brought up to the SpyderPro feature set via software. If you already own one of these devices, check the upgrade first.
We use the computer behind the calibrated monitor ourselves: our Mac Studio review shows it in video editing.
Frequently asked questions
What does a monitor calibrator do?
It measures what your screen actually displays. First, the monitor is brought to target values for brightness, white point and tone curve; then the device placed on the screen reads a series of color patches. The result is an ICC profile that is stored in the operating system and used by programs such as Photoshop.
What is the difference between software and hardware calibration?
With software calibration, the correction sits in the computer, according to EIZO usually in the graphics card's 8-bit tables, and gradients can show banding. With hardware calibration, the values are stored in the monitor itself. Calibrite lists the Display Pro HL, Display Plus HL and ColorChecker Studio as compatible with this, but not the Display 123.
Which white point and brightness are right for printing?
For prepress and printing, the ECI recommends D50 at 5000 kelvin; for on-screen work, D65 is the general target. For matching against prints, EIZO cites roughly 80 to 100 cd/m². If you edit at 250 cd/m², the same print next to the screen will quickly look too dark.
Is the Calibrite Display 123 good enough for photos?
For photos prepared for the web or social media, yes. According to Calibrite, it measures up to 1,000 nits and supports up to two screens. For the white point, however, it only offers D65 or the monitor's native value, so it lacks D50 for comparing with paper.
How often should you calibrate your monitor?
Monitors drift over time. For graphics work, EIZO recommends recalibrating at least every 200 to 300 operating hours; Calibrite recommends every three to four weeks. A fixed date in your calendar is enough to keep the profile current.
Does an old X-Rite i1Display Pro still work?
Yes. Since the photo business was handed over, the i1Display devices have been sold under the Calibrite name, and Calibrite lists the i1Display Pro as compatible with its software. According to the same notice, the i1Pro 2, i1Pro 3 and ColorMunki Smile are not compatible. According to Datacolor, the SpyderX and Spyder X2 can be upgraded to SpyderPro via software.
Sources
- Calibrite: Display Pro HL
- Calibrite: Display Plus HL
- Calibrite: Display 123
- Calibrite: ColorChecker Studio
- Calibrite: Calibrator comparison chart (PDF, 2026)
- Calibrite: Calibration guide with D65 and D50 target values (PDF)
- Calibrite: Compatibility of legacy X-Rite devices
- X-Rite: Announcement on Calibrite
- Datacolor: Spyder
- Datacolor: SpyderPro
- EIZO: Hardware vs. software calibration
- EIZO: All about monitor calibration
- EIZO: Monitor calibration and intervals
- EIZO: Target values for matching with prints
- European Color Initiative: DIGIPIX 3 guide to digital photography (PDF)
Where to buy
- Calibrite Display 123Check price at Amazon.deCheck price at Amazon.co.ukCheck price at Amazon.nlCheck price at Amazon.com.beCheck price at Amazon.frCheck price at Amazon.itCheck price at Amazon.esCheck price at Amazon.plCheck price at Amazon.seAvailable in Germany: Amazon.de
- Calibrite Display Pro HLCheck price at Amazon.deCheck price at Amazon.co.ukCheck price at Amazon.nlCheck price at Amazon.com.beCheck price at Amazon.frCheck price at Amazon.itCheck price at Amazon.esCheck price at Amazon.plCheck price at Amazon.seAvailable in Germany: Amazon.de
- Calibrite Display Plus HLCheck price at Amazon.deCheck price at Amazon.co.ukCheck price at Amazon.nlCheck price at Amazon.com.beCheck price at Amazon.frCheck price at Amazon.itCheck price at Amazon.esCheck price at Amazon.plCheck price at Amazon.seAvailable in Germany: Amazon.de
- Calibrite ColorChecker StudioCheck price at Amazon.deCheck price at Amazon.co.ukCheck price at Amazon.nlCheck price at Amazon.com.beCheck price at Amazon.frCheck price at Amazon.itCheck price at Amazon.esCheck price at Amazon.plCheck price at Amazon.seAvailable in Germany: Amazon.de
- Datacolor SpyderCheck price at Amazon.deCheck price at Amazon.co.ukCheck price at Amazon.nlCheck price at Amazon.com.beCheck price at Amazon.frCheck price at Amazon.itCheck price at Amazon.esCheck price at Amazon.plCheck price at Amazon.seAvailable in Germany: Amazon.de
- Datacolor SpyderProCheck price at Amazon.deCheck price at Amazon.co.ukCheck price at Amazon.nlCheck price at Amazon.com.beCheck price at Amazon.frCheck price at Amazon.itCheck price at Amazon.esCheck price at Amazon.plCheck price at Amazon.seAvailable in Germany: Amazon.de
