Black Friday Woche läuft bis 30.11.: our pick in each buying guide
Independent buying adviceEvery claim with a sourceNo paid verdictsIn 36 countries1,746 guides and reviews in German How we test
handgetestet

Buying a tankless water heater: how many kW a shower needs, who may connect three-phase power, and when an under-sink tank or a small unit is enough.

handgetestet editorial team · Updated November 17, 2026

Editorial selection based on research, not tested by us. Reasons and limitations are in the text.

Contents13 sections

This guide was first published in German on handgetestet.de.

Before you think about displays, apps or brands, ask yourself a single question: where should the hot water come from? For a shower or bathtub, you need an electronically controlled tankless water heater with 18 to 27 kW on three-phase power, installed by a licensed electrical contractor. For a single hand-wash basin, a small plug-in unit is enough. In between lies the kitchen sink. Both approaches work there, depending on whether there is three-phase power in the wall.

This guide is sorted by where the unit will be used. That way you can quickly see which class of device is even an option.

Three classes of device, three connections

A tankless water heater only heats the water when it flows. It stores nothing. The German consumer advice center (Verbraucherzentrale) calls that an advantage, because there are no standby losses. Among the large units, it distinguishes three designs. Hydraulic models only switch on above several liters per minute and usually have just two stages; they often cope poorly with water-saving shower heads. Electronic units regulate their output according to flow and temperature. Fully electronic ones hold the desired temperature even at the limit of their output by throttling the flow if necessary. According to the Verbraucherzentrale, an electronic unit saves up to 30 percent electricity in everyday use compared with a hydraulic one.

Below that, there are two small solutions for 230 volts. A small tankless water heater such as Clage’s 3.5 kW set delivers around two liters per minute at a hand-wash basin. An under-sink tank, on the other hand, keeps water in stock; Stiebel Eltron builds it, for example, with five or ten liters and 1 or 2 kW. Both units in this guide come with a standard German Schuko plug.

How many kW does a shower need?

The output determines how much hot water comes out at once. For the DEX Next S at a temperature rise of 28 degrees, roughly from 12 to 40 °C, Clage states these quantities: 9.2 liters per minute at 18 kW, 10.7 liters at 21 kW, 12.3 liters at 24 kW and 13.8 liters at 27 kW. The Verbraucherzentrale considers units of around 21 kW appropriate for comfortable showering. Smaller units often limit the flow.

Clage points out that the flow also depends on the inlet temperature. Colder tap water in winter means fewer liters. If you want to run the bathtub and washbasin at the same time, you should therefore plan for 24 rather than 18 kW. Whether the building’s wiring can deliver that is not a matter of what you want, though, but of what the electrician says: according to the Verbraucherzentrale, the installation company must check the cross-section of the existing power cable before installation. Clage specifies the required cross-section as 4 mm² for 18 and 21 kW and 6 mm² for 24 and 27 kW.

Three-phase power is a job for a registered contractor

The large units are hard-wired to 400 volts. Under Section 13 of the German Low Voltage Connection Ordinance (NAV), work on the electrical installation behind the main service fuse may only be carried out by the grid operator or by an installation company registered in a grid operator’s installer directory. In the manual for the electronicVED, Vaillant states explicitly that mounting, installation and commissioning may only be carried out by qualified tradespeople.

The grid operator also has to be informed. Section 19 NAV requires notification if additional appliances increase the capacity that must be provided. In their data sheets, AEG and Stiebel Eltron point out that for units without a plug, the grid operator’s approval must be obtained and that the registered contractor will help with this. The output above which your grid operator must give approval is set out in its technical connection conditions. Ask about this before buying.

And in a rented apartment? Under the NAV, the party responsible for the electrical installation is the connection owner, which for an existing service connection means the property owner. A replacement, let alone a new three-phase connection, should therefore be agreed with the landlord beforehand.

Small tanks: convenient, but with standby losses

The under-sink tank has one clear advantage. The water is hot immediately, even if you are only rinsing a mug. In return, keeping it warm costs electricity. For the SNU 5 Plus, Stiebel Eltron states 0.19 kWh in 24 hours at 65 °C and 0.07 kWh at 38 °C. The German Environment Agency (Umweltbundesamt) puts the savings from a thermo-stop function or a timer on under-sink units with 5 to 15 liters at around 135 kWh per year.

Turning it down is still not the right reflex. The Verbraucherzentrale describes the under-sink unit as a hygiene risk if it is rarely used or the temperature is too low. The Umweltbundesamt recommends at least 60 °C at the outlet of a drinking water heater and no less than 55 °C in the pipe system so that Legionella bacteria do not multiply. In the manual for the SNU 5 Plus, Stiebel Eltron recommends the energy-saving ECO setting at around 60 °C. We would leave the dial there. In a vacation home or guest bathroom, where the basin sits unused for weeks, we would rather go for a small tankless water heater without storage.

One more pitfall. According to the manual, the unvented SNU 5 Plus may only be installed and operated with an unvented (low-pressure) faucet. So check before buying whether your existing faucet is compatible. What else a kitchen faucet should be able to do is covered in our guide to kitchen faucets (in German).

Six units for bathroom, kitchen and washbasin

ModelDesign and outputTemperatureBest forOffer (affiliate link)
Clage DEX Next Sfully electronic, 18/21/24/27 kW, 400 V20 to 60 °C, to the degreeBathroom with shower and tubAvailable in Germany: Amazon.de
Stiebel Eltron HDB-E 18/21/24 Trendelectronically controlled, 18/21/24 kW, 400 VSettings 35, 43, 50, 55 °CBathroom, fixed preferred temperatureAvailable in Germany: Amazon.de
Vaillant electronicVED (VED E ../8)electronic, 18 to 27 kW, 400 V30 to 55 °C, continuously variableBathroom with one showerAvailable in Germany: Amazon.de
AEG DDLE Kompakt 11/13electronic, 11.2 or 13.5 kW, 400 V, under-sink20 to 60 °C, adjustable internallyKitchen sink, one or two outletsAvailable in Germany: Amazon.de
Clage MCX BlueSmall tankless water heater with faucet, 3.5 kW, plug35, 38 or 45 °CHand-wash basin, guest WCAvailable in Germany: Amazon.de
Stiebel Eltron SNU 5 PlusUnder-sink tank, 5 l, 2 kW, unvented, plug35 to 85 °CKitchen without three-phase powerAvailable in Germany: Amazon.de
Want a second opinion before buying?Ask via WhatsApp

Clage DEX Next S

The contractor sets the output to 18, 21, 24 or 27 kW during installation. According to Clage, the unit switches on from as little as 1.5 liters per minute, which suits water-saving shower heads. A Bluetooth remote control is included, control via app is possible, and a thermal disinfection function at 70 °C is built in. For a family bathroom, this is the class we would look at first.

Stiebel Eltron HDB-E 18/21/24 Trend

There is no degree-by-degree selection here. The HDB-E offers four fixed settings from 35 to 55 °C, which Stiebel Eltron holds electronically using two sensors. The scald protection is set internally by the installer. If you always shower at the same temperature anyway, you lose little with it.

Vaillant electronicVED

The basic version VED E ../8 regulates continuously between 30 and 55 °C. According to the manual, the maximum flow is 8 liters per minute, and 10 liters for the 27 kW unit. That is enough for one shower; for two outlets at the same time, it gets tight. Vaillant claims up to 30 percent energy savings compared with hydraulic units.

AEG DDLE Kompakt 11/13

At 29.3 by 17.4 centimeters, the Kompakt fits under the sink. AEG intends it for one or two nearby outlets and lets the contractor choose between 11.2 and 13.5 kW. It still needs three-phase power and a contractor; the included power cable does not change that. Measured against the roughly 21 kW the Verbraucherzentrale cites for showering, it is too weak for that purpose.

Clage MCX Blue

A set consisting of a small tankless water heater and its own washbasin faucet. With 3.5 kW on a Schuko plug, it delivers 2.0 liters per minute at a 25-degree temperature rise, according to Clage. A sensor button lets you limit the outlet temperature to 35, 38 or 45 °C. That is enough for washing hands in the guest WC, but not for washing pots.

Stiebel Eltron SNU 5 Plus

Five liters, 2 kW, plug. According to the data sheet, that yields 9.3 liters of mixed water at 40 °C. The vacuum insulation is meant to reduce standby consumption, and a thermo-stop function prevents the faucet from heating up as well. For a kitchen without three-phase power in the wall, this is the simplest solution. With an unvented faucet.

How we would decide

  • Bathroom with shower and tub: fully electronic with 21 to 24 kW, such as the Clage DEX Next S. Have the cable cross-section checked first.
  • Bathroom with one shower and fixed habits: Stiebel Eltron HDB-E or Vaillant electronicVED.
  • Kitchen sink with three-phase connection: AEG DDLE Kompakt 11/13.
  • Kitchen without three-phase power: Stiebel Eltron SNU 5 Plus with an unvented faucet, temperature around 60 °C.
  • Rarely used hand-wash basin: Clage MCX Blue, because no water sits in storage.

One last thought on the electricity bill. According to the Umweltbundesamt, in a two-person household with electric water heating, around 25 percent of total electricity consumption goes to hot water. The agency also credits a water-saving shower head with significant savings, and electronic units handle such shower heads better than hydraulic ones. You will find suitable models in our guide to shower systems.

Frequently asked questions

How many kW does a tankless water heater need for a shower?

The German consumer advice center (Verbraucherzentrale) considers units of around 21 kW appropriate for comfortable showering. For the DEX Next S at a temperature rise of 28 degrees, Clage states 10.7 liters per minute at 21 kW and 12.3 liters at 24 kW. For a bathtub and washbasin at the same time, plan for 24 rather than 18 kW.

What is the difference between hydraulic and electronic tankless water heaters?

Hydraulic units only switch on above several liters per minute, usually have two stages and often cope poorly with water-saving shower heads. Electronic units regulate their output according to flow and temperature. According to the Verbraucherzentrale, they save up to 30 percent electricity in everyday use compared with hydraulic ones.

Can I connect a tankless water heater myself?

Not the large units. Under Section 13 of the German Low Voltage Connection Ordinance (NAV), only the grid operator or a registered installation company may work on the installation behind the main service fuse. The grid operator must be informed when higher loads are added. In a rented apartment, a replacement should be agreed with the landlord beforehand.

Is my power cable sufficient for a tankless water heater?

According to the Verbraucherzentrale, the installation company checks this before installation. Clage specifies a cross-section of 4 mm² for 18 and 21 kW and 6 mm² for 24 and 27 kW. So whether the building's wiring can deliver the desired output is decided by the electrician.

Under-sink tank or small tankless water heater?

The tank delivers hot water immediately but uses electricity to keep it warm. If it is rarely used or run too cool, the Verbraucherzentrale sees a hygiene risk. For a guest bathroom basin that sits unused for weeks, a small tankless water heater without storage such as the Clage MCX Blue is therefore the better fit.

What temperature should an under-sink tank be set to?

The German Environment Agency (Umweltbundesamt) recommends at least 60 °C at the outlet of a drinking water heater so that Legionella bacteria do not multiply. For the SNU 5 Plus, Stiebel Eltron recommends the ECO setting at around 60 °C. The unvented SNU 5 Plus may only be operated with an unvented (low-pressure) faucet.

Sources

Where to buy

Shop in:

Sale, delivery, warranty and product safety are the sole responsibility of the respective retailer and manufacturer. All information without guarantee; prices and availability may change.

Links marked as affiliate links earn us a small commission if you buy through them. The price stays the same for you, and our verdict stays independent. As an Amazon Associate we earn from qualifying purchases.

Still undecided?

Keep comparing at your own pace – every article in this category is checked monthly for new and discontinued models.

Share this guide