Black Friday week from 19.11.: our pick in each buying guide
Independent buying adviceEvery claim with a sourceNo paid verdictsIn 36 countries1,735 guides and reviews in German How we test
handgetestet

Buying a cordless combo kit: six kits from Bosch, Makita, Milwaukee, DeWalt, Ryobi and Einhell, plus a simple calculation for comparing them with buying tools individually.

handgetestet editorial team · Updated November 16, 2026

Editorial selection based on research, not tested by us. Reasons and limitations are in the text.

Contents10 sections

This guide was first published in German on handgetestet.de.

Saturday morning, and the new shelf needs to go on the wall. With just one tool, that means: drill, drill bit out, driver bit in, screw, driver bit out, drill bit in. A combo kit with a drill/driver and an impact driver saves you exactly this back and forth. As an entry point for DIYers, we recommend the Bosch Professional kit with the GSR 18V-55 and GDX 18V-200. If money is tight, the Ryobi R18CK2-2C20G remains a solid choice. A kit only pays off under one condition, though: you don’t own any batteries of that brand yet.

Count the batteries first, then the tools

At its core, a combo kit is a battery package with two tools attached. The two batteries and the charger make up a large part of the price. Whether the kit is cheaper than buying individually takes three minutes to find out: look up both tools as bare tools (at Makita ending in „Z“, at Milwaukee in „-0“, at Bosch and Einhell as „Solo“ or „without battery“), add a starter kit of two batteries and a charger of the same capacity, and compare the total with the kit price. The case and bit set hardly count.

If you already have a charger of that brand in the basement, the math flips. Then the kit makes you pay for parts you’ve long owned, and two bare tools are almost always the better choice. Which battery platform suits you in the long run is covered in our comparison of battery platforms. That decision should come before the first kit, not after.

A few points separate good kits from bait offers:

  • Two batteries instead of one. A single battery means a forced break as soon as it’s empty.
  • Capacity of 4.0 Ah or more. Small 2.0 Ah batteries are light but don’t last long in an impact driver.
  • Hammer drill/driver or plain drill/driver? For anchor holes in brick, the hammer function is enough; for reinforced concrete, you need a rotary hammer anyway.
  • The chuck on the impact driver: a ¼-inch hex takes driver bits; an additional ½-inch square drive also takes sockets.

Six combo kits side by side

KitContentsKey specs according to manufacturerBest forOffer (affiliate link)
Bosch Professional GDX 18V-200 + GSR 18V-55drill/driver, impact driver, 2 × 4.0 Ah, fast charger, L-Case55 Nm drill/driver; 200 Nm impact driver, ¼“ hex and ½“ square driveDIYers who want to build up a platformAvailable in Germany: Amazon.de
Makita DLX2528TJhammer drill/driver DHP489, impact driver DTD173, 2 × 5.0 Ah, charger, Makpac73 Nm, 16 mm in masonry; 180 Nm, four modesinterior finishing, timber construction, lots of work in one goAvailable in Germany: Amazon.de
Milwaukee M18 FPP2A3-502Xhammer drill/driver FPD3, impact driver FID3, 2 × 5.0 Ah, charger, HD Box158 Nm; 226 Nm, 3,900 rpmtradespeople and heavy usersAvailable in Germany: Amazon.de
DeWalt DCK2222MP2Thammer drill/driver DCD86M, impact driver DCF86M, 2 batteries, charger, T-STAK box17.7 cm short; over 200 Nm, 10 cm longworking in tight cornersAvailable in Germany: Amazon.de
Ryobi R18CK2-2C20Ghammer drill/driver, impact driver, 2 batteries, charger, bag50 Nm, 13 mm chuck; up to 200 Nmbeginners with a leaning toward garden and homeAvailable in Germany: Amazon.de
Einhell TE-TK 18/2 Li Kit (CD+AG)drill/driver, 115 mm angle grinder, 1 × 4.0 Ah, charger, bag40 Nm, 21 torque settings; cutting depth up to 28 mmhobbyists who cut more than they screwAvailable in Germany: Amazon.de
Want a second opinion before buying?Ask via WhatsApp

Bosch Professional GDX 18V-200 + GSR 18V-55

According to Bosch, two 4.0 Ah batteries, the GAL 18V-40 fast charger and an L-Case are included. The highlight is the GDX: its chuck takes driver bits and, via the ½-inch square drive, sockets as well. Bosch states 200 Nm of torque and up to 350 Nm of breakaway torque at 1.2 kg without battery. The GSR 18V-55 is a plain drill/driver with 28 and 55 Nm, without a hammer mechanism. If you often set anchors in brick, you’ll notice.

Makita DLX2528TJ

The Makpac holds the DHP489 hammer drill/driver and the DTD173 impact driver, according to the Amazon listing with two 5.0 Ah batteries. Makita specifies 73 Nm and a 16 mm drilling capacity in masonry for the DHP489; with battery, it weighs up to 2.5 kg. The DTD173 is only 111 mm long and offers four modes from 20 to 180 Nm, including one for wood. Powerful, but noticeably heavier than a DIY drill.

Milwaukee M18 FPP2A3-502X

The most expensive package of the lineup. With the FPD3 at 158 Nm and the FID3 at 226 Nm and 3,900 revolutions per minute, Milwaukee includes two 5.0 Ah batteries, the M12-18 FC charger and an HD Box. The charger also fills the small M12 batteries, in case compact tools are added later. For shelves and a garden fence, that’s considerably more power than you’ll ever need.

DeWalt DCK2222MP2T

With DeWalt, the design stands out. According to the manufacturer, the DCD86M hammer drill/driver measures 17.7 cm, and the DCF86M impact driver only 10 cm while delivering over 200 Nm. Both are brushless; the drill/driver has a two-speed all-metal gearbox and a 13 mm metal chuck. If you’re driving screws inside a kitchen base cabinet or between rafters, you’ll appreciate every centimeter.

Ryobi R18CK2-2C20G

Ryobi states 50 Nm for the hammer drill/driver and up to 200 Nm for the impact driver. According to the Amazon listing, a 2.0 Ah and a 4.0 Ah battery are included, plus a charger and bag. What makes the kit interesting is the ONE+ platform, which covers many garden and household tools. It doesn’t meet professional demands, and it doesn’t try to.

Einhell TE-TK 18/2 Li Kit (CD+AG)

No impact driver, but an angle grinder instead. Einhell combines the TE-CD 18/40 Li drill/driver (40 Nm, 21 settings, two speeds) with the TC-AG 18/115 Li for discs up to 115 mm. A cutting disc, a grinding disc and a bit box are included. The weak point is the single 4.0 Ah battery: using both tools at the same time isn’t possible.

Which kit suits which project

For furniture, lights, shelves and occasional deck work, the Bosch kit is enough. Thanks to the dual drive, the GDX also turns nuts, for example on garden furniture or a bike trailer. If you miss the hammer action when setting anchors, reaching for a separate rotary hammer makes more sense anyway than a stronger drill/driver. More on the differences between drill/drivers is in our guide to cordless drill/drivers (in German).

If you’re renovating a house, building a carport or screwing down wooden decks in series, Makita and Milwaukee show their reserves. Their 5.0 Ah batteries store a quarter more energy than 4.0 Ah batteries, and the impact drivers have reserves for long structural screws. With Milwaukee, you pay for professional technology that DIYers rarely use to the full. DeWalt sits in between and is the choice for tight spots.

With a small budget and a garden, Ryobi fits. Einhell is only worth it if you really need the angle grinder, for example for tiles, metal profiles or rust on a railing. If you actually want to drive screws, it misses your needs. With Einhell, a second battery should go straight on the list; tips on that are in our guide to tool batteries (in German).

One last look is worth taking at the item number. Many kits come with the same tools but different batteries, without a case or with no battery at all. A single letter at the end decides the runtime.

Frequently asked questions

Is a cordless combo kit worth it compared with individual tools?

Only if you don't already have batteries of the same brand. Price both tools as bare tools plus a starter kit of two batteries and a charger, and compare the total with the kit price. If you already have a charger of that brand in the basement, two bare tools are almost always the better choice.

What should I look for when buying a combo kit?

Two batteries instead of one, because a single one means a forced break. Capacity should be 4.0 Ah or more; small 2.0 Ah batteries don't last long in an impact driver. Also check the item number, because many kits are available with different batteries or none at all.

What does the square drive on the Bosch GDX 18V-200 do?

Its chuck takes driver bits via the ¼-inch hex and sockets via the ½-inch square drive. That lets it turn nuts too, for example on garden furniture or a bike trailer. Bosch states 200 Nm of torque at 1.2 kg without battery.

Is a combo kit enough for anchors in concrete?

For anchor holes in brick, a hammer drill/driver is enough; for reinforced concrete, you need a rotary hammer anyway. The GSR 18V-55 in the Bosch kit is a plain drill/driver without a hammer mechanism. If you miss the hammer action when setting anchors, a separate rotary hammer makes more sense than a stronger drill/driver.

Which combo kit suits renovation work and wooden decks?

For lots of work in one go, the Makita DLX2528TJ and the Milwaukee M18 FPP2A3-502X show their reserves. Their 5.0 Ah batteries store a quarter more energy than 4.0 Ah batteries. For tight spots, the DeWalt DCK2222MP2T with an impact driver only 10 cm long is a good fit.

Sources

Where to buy

Shop in:

Sale, delivery, warranty and product safety are the sole responsibility of the respective retailer and manufacturer. All information without guarantee; prices and availability may change.

Links marked as affiliate links earn us a small commission if you buy through them. The price stays the same for you, and our verdict stays independent. As an Amazon Associate we earn from qualifying purchases.

Still undecided?

Keep comparing at your own pace – every article in this category is checked monthly for new and discontinued models.

Share this guide