Black Friday Woche ab 19.11.: unsere Wahl je Ratgeber
Independent buying adviceEvery claim with a sourceNo paid verdictsIn 36 countries1,734 guides and reviews in German How we test
handgetestet

Buying a Gas Torch or Blowtorch 2026: Guide by Use

Buying a gas torch or blowtorch: cartridge or hose, brazing up to 28 mm, flame weeding and the legal situation in Germany, lighting the grill and safe storage.

handgetestet editorial team · Updated November 17, 2026
Contents14 sections

This guide was first published in German on handgetestet.de.

When you buy a blowtorch, you are really choosing a gas. Butane from a pierceable cartridge is enough for soft soldering thin copper pipe and lighting charcoal, brazing requires a hotter gas such as MAPP, and anyone who wants to flame-weed entire driveways connects the torch by hose to a propane cylinder. For DIYers who soft solder copper pipe and occasionally braze it, we consider the Rothenberger Rofire 4 Piezo with the Multigas 300 cartridge the most sensible purchase.

Sounds trivial. It is not, because many bad purchases start with a cheap torch that simply does not deliver enough heat to a 15 mm pipe.

First decide what needs to burn

Three uses cover almost everything that happens with an open flame around the house: soldering pipes and sheet metal, flame weeding joints, and grill and kitchen. Each calls for a different class of device. If you want to do everything with one torch, you almost always end up with a compromise that is not really good at any of them.

First, a word on the technology, because it determines the cartridge. According to Sievert, the 7/16-inch screw connection to EN 417 is standard in Germany; there are also pierceable cartridges such as the Campingaz C 206, which only work with matching devices. According to Sievert, MAPP cartridges contain propylene, and this is exactly the gas Rothenberger and Sievert specify for their brazing sets. A hose unit always needs a pressure regulator on the cylinder. Sievert explicitly points out that a hose break safety valve does not replace this regulator, but only stops the gas flow if the hose breaks.

Path 1: You solder copper pipe or sheet metal

Here, the pipe diameter matters. Rothenberger assigns soft soldering to the range up to 450 degrees, with brazing starting above that. For the Rofire 4 Piezo, Rothenberger specifies soft soldering up to 22 mm and brazing up to 15 mm. That covers heating connections, small-scale refrigeration work and many bathroom repairs.

If you braze 22 or 28 mm pipe more often, you need more heat. According to Rothenberger, the Super Fire 4 handles brazing up to 28 mm, but only with the flame reflector mounted and protected from wind. This restriction is in the manufacturer’s data, and it is honest: outdoors in gusts, every specification shrinks. A gas flame has no business near circuit boards and cables; that calls for a soldering station (in German) on the bench.

When brazing, flux spatters and the flame is dazzling. Glasses are part of the job; which lenses are suitable is covered under safety glasses (in German).

Path 2: You want to clear joints

Flame weeding is popular on paving because chemical products are off-limits there. Section 12 (2) of the German Plant Protection Act (Pflanzenschutzgesetz) prohibits plant protection products on sealed outdoor surfaces. The flame does not fall under this, but it has limits of its own. Under Section 39 (5) of the German Federal Nature Conservation Act (Bundesnaturschutzgesetz), it is prohibited to burn off ground cover on meadows, field margins and unused land, as well as along hedges and on slopes. So it means the paved path, not the lawn edge under the thuja.

Wind can get expensive. The legal expenses insurer ARAG refers to a ruling by the Higher Regional Court of Celle (case no. 8 U 203/17): the judges ruled that fighting weeds with a gas torch in winds of around 30 km/h was grossly negligent, after an arborvitae hedge and then a house had caught fire. The insurer was allowed to reduce its payout. ARAG advises removing leaves beforehand and keeping water or a garden hose ready.

On a twelve-square-meter patio, a cartridge unit with a wide burner head is enough. From a driveway onward, that becomes tedious, and a hose burner on a propane cylinder is the more relaxed solution.

Path 3: Grill and kitchen

Lighting charcoal with a blowtorch is quick and needs no firelighter cubes. Nobody needs MAPP or a professional case for that. A simple pierceable-cartridge torch is enough; charcoal and chimney starters are covered in our article on the charcoal kettle grill (in German). For crème brûlée, on the other hand, a blowtorch is crude; small kitchen torches filled with butane dose more finely.

Six torches compared

ModelGas and connectionKey data (manufacturer information)For whom
Rothenberger Rofire 4 Piezo SetMultigas 300, 7/16-inch EU, 600 mlSoft soldering up to 22 mm, brazing up to 15 mm, piezo ignitionDIYers with copper pipe
Rothenberger Super Fire 4 Hot BoxMAPP, 7/16-inch EUBrazing up to 28 mm (with reflector, protected from wind), soft soldering up to 35 mm, casePlumbers, lots of brazing
Sievert Powerjet Powercase MAPP (253521)MAPP 400 g, 7/16-inch EU14 mm cyclone burner, 2.2 kW, 170 g/h, support foot, caseProfessionals who swap burner heads
Campingaz Soudogaz X2000 PZC 206 pierceable cartridge120 g/h, 1.65 kW, piezo ignitionLighting the grill, light soldering work
Campingaz GT3000 PZCG 3500 cartridge (according to the Amazon listing)Garden burner with piezo ignitionPatio and short paths
Kemper Unkrautvernichter ProPropane cylinder, 5 m hose60 mm burner, pressure reducer, cylinder cart (according to the Amazon listing)Driveways and large paved areas

Rothenberger Rofire 4 Piezo Set

For the home workshop, this is the set we would go for. It contains the torch and a 600 ml Multigas 300 cartridge, and Rothenberger specifies soft soldering up to 22 mm and brazing up to 15 mm. According to the manufacturer, after about five seconds of preheating, the torch also works upside down, which matters when soldering under the ceiling.

Rothenberger Super Fire 4 Hot Box

Built for weekly brazing work. According to Rothenberger, the case contains the handle, a MAPP cartridge, pencil and cyclone burners, a stand and a flame reflector. One cartridge is said to allow up to 2.5 hours of brazing. If you connect two radiators a year, you are paying for a lot of equipment that sits in the cupboard.

Sievert Powerjet Powercase MAPP

The Powerjet is a modular system. According to Sievert, burner heads are swapped via a bayonet mount without tools, from a pencil burner to a hot air head. The 253521 set includes a 14 mm cyclone burner with 2.2 kW, a 400 g MAPP cylinder, a support foot and a case. It becomes interesting as soon as heat-shrink tubing or preheating work comes up in addition to soldering.

Campingaz Soudogaz X2000 PZ

The simple solution. It runs on the widely available C 206 pierceable cartridge, and Campingaz states a consumption of 120 g/h and an output of 1.65 kW. That is enough for lighting charcoal, stripping paint in small spots or soft soldering thin pipe. Brazing is not its specialty.

Campingaz GT3000 PZ

A garden burner with a long tube, so you can work standing up. According to the retailer, a Garden Gas CG 3500 cartridge is included. Its predecessor, the GT2000 PZ, is currently not available there. When buying replacements, compare the cartridge designation; other cartridges do not automatically fit.

Kemper Unkrautvernichter Pro

The counterpart for large areas. According to the listing, a burner with a 60 mm head, five meters of hose, a propane pressure reducer and a cart for the cylinder make up a complete set. The cylinder itself is not included. If you only have a balcony, this is far too big a purchase.

Mentioned in passing: Guilbert Express from France makes gas soldering irons and roofing torches for plumbers and roofers. For zinc gutters, that is a good address, but for house and garden it is specialist equipment that we do not compare here.

Storing cartridges, connecting cylinders

The German Liquefied Petroleum Gas Association (DVFG) advises keeping only as many cartridges at home as necessary, as a guideline up to six per appliance. The basement is unsuitable for this, and so is the car in summer. According to the DVFG, gas cylinders belong upright and above ground level in a well-ventilated place, such as a garage or garden shed. After working, close the valve and put the protective nut on. For checking tightness, the association recommends leak detection spray.

And the empty cartridge? Completely empty, it may go in the recycling bin. With residual gas, it belongs at the municipal recycling center or a mobile hazardous waste collection point, according to the DVFG.

How we would decide

  • Soft soldering and brazing copper pipe up to 15 mm: Rothenberger Rofire 4 Piezo Set.
  • Regularly brazing 22 and 28 mm pipe: Rothenberger Super Fire 4 Hot Box; for interchangeable burners and hot air, the Sievert Powerjet.
  • Lighting the grill and the occasional thin pipe: Campingaz Soudogaz X2000 PZ.
  • Patio and garden path: Campingaz GT3000 PZ; driveway or yard with lots of joints: Kemper with a propane cylinder.

Frequently asked questions

Which gas torch is enough for brazing copper pipe?

That depends on the pipe diameter. According to the manufacturer, the Rothenberger Rofire 4 Piezo handles brazing up to 15 mm and soft soldering up to 22 mm. If you often braze 22 or 28 mm pipe, you need more heat, such as the Super Fire 4, which manages up to 28 mm with a reflector and protected from wind.

Butane, propane or MAPP: which gas for what?

Butane from a pierceable cartridge is enough for soft soldering thin pipes and lighting charcoal. Brazing requires a hotter gas such as MAPP, which according to Sievert contains propylene. For large areas, the torch is connected by hose to a propane cylinder, always with a pressure regulator.

Is flame weeding allowed?

On paving, yes; chemical products are off-limits there under Section 12 of the German Plant Protection Act. Under Section 39 of the German Federal Nature Conservation Act, however, it is prohibited to burn off ground cover on meadows, field margins, along hedges and on slopes. So it means the paved path, not the lawn edge under the hedge.

What should you watch out for when flame weeding in wind?

The Higher Regional Court of Celle ruled that flame weeding in winds of around 30 km/h was grossly negligent after a hedge and a house had caught fire. The insurer was allowed to reduce its payout. ARAG advises removing leaves beforehand and keeping water or a garden hose ready.

Which weed burner for large areas?

On a small patio, a cartridge unit such as the Campingaz GT3000 PZ, which lets you work standing up, is enough. From a driveway onward, that becomes tedious. A hose burner on a propane cylinder such as the Kemper Unkrautvernichter Pro is then more relaxed; the cylinder is not included.

How do I store gas cartridges correctly?

The German Liquefied Petroleum Gas Association (DVFG) advises keeping only as many cartridges as necessary, as a guideline up to six per appliance. The basement and the car in summer are unsuitable. Empty cartridges may go in the recycling bin; with residual gas, they belong at the municipal recycling center or a mobile hazardous waste collection point.

Sources

Where to buy

Shop in:

Sale, delivery, warranty and product safety are the sole responsibility of the respective retailer and manufacturer. All information without guarantee; prices and availability may change.

Links marked as affiliate links earn us a small commission if you buy through them. The price stays the same for you, and our verdict stays independent. As an Amazon Associate we earn from qualifying purchases.